Summary of Contents for JUNGLE ROOM JR-220120200
- Page 1 Step10 Place floor tray/liner inside the tent floor and secure to Velcro pieces of the tent cover. Grow tent ASSEMBLY INSTRUCTIONS JR - 220120200 Step11 Close all zippers. All parts have been assembled. TENT SIZE: Length: 220cm - Width:120cm - Height: 200 cm...
- Page 2 Step7 Gently pull up the back of the tent cover such that the two upper No tools back corners of the cover are squarely in place. Note that having a required helper makes this process easier. Parts list Tent cover Floor Tray Step8 Gently pull the “roof”...
- Page 3 Step3 Step4 Assemble remaining parts of the frame as shown below, once the Place hanging poles 6 and 7 on top of the frame. frame is assembled, make sure that all the poles are fully inserted into the corners.
- Page 4 Step5 Step1 Unzip all zippers of the tent cover all the way. Assemble the bottom half of the frame as shown, making sure that the poles are fully inserted into the corner. Step6 Put frame upright on the base of the tent, making sure that all four corners are inside the base.
Need help?
Do you have a question about the JR-220120200 and is the answer not in the manual?
Questions and answers