Page 1
No tools required Grow tent ASSEMBLY INSTRUCTIONS JR - 120120200 Parts list Tent cover Floor Tray TENT SIZE: Length: 120cm - Width:120cm - Height: 200cm...
Page 2
Step3 Step3 Step9 Step1 Step1 Connect open ends of subunits A and B to form the complete Gently wriggle/adjust all eight corners until cover is square Connect open ends of subunits A and B to form the complete Assemble subunit A as shown using poles 3 and 2 Assemble subunit A as shown using poles 3 and 2 frame.
Page 3
Step5 Step5 Step7 Step7 Unzip all zippers of the tent cover all the way Unzip all zippers of the tent cover all the way No tools Gently pull up the back of the tent cover such that the two upper Gently pull up the back of the tent cover such that the two upper back corners of the cover are sqarely in place.
Page 4
Step11 Step9 Close all zippers. All parts have been assembled. Gently wriggle/adjust all eight corners until cover is square against the frame. Step10 Place floor tray/liner inside the tent floor and secure to Velcro pieces of the tent cover.
Need help?
Do you have a question about the 120120200 and is the answer not in the manual?
Questions and answers