PASCO Node Cart Manual

//code.Node Cart
Quick Start Guide
012-16934A
Note: Additional information on how to use the //code.Node Cart
can be found in the SPARKvue and PASCO Capstone Help.
What's Included
//code.Node Cart
Required Equipment
• //code.Node (PS-3231)
Experiments
Print-ready experiment worksheets are available to download from the
PASCO website. Go to pasco.com/freelabs and enter PS-3235 in the
Part No. field to access all experiments related to the //code.Node Cart.
Software Help
Additional information on how to use the //code.Node Cart can be found
in the PASCO Capstone and SPARKvue Help.
SPARKvue
Click then select Help.
PASCO Capstone
In the menu bar, click Help then select PASCO Capstone Help.
| PS-3235
Features
1
6
Axle Magnet
1
For measuring the cart's
motion using the //code.Node
Magnetic Field Sensor.
//code.Node Bay
2
For inserting a //code.Node.
Release Tab
3
For releasing the //code.Node
from the cart.
Insert a //code.Node
1. Insert the top side of the //code.Node into the cart bay face up.
2. Press down on the bottom side of the //code.Node until it snaps in
place.
To remove the //code.Node from the cart, gently pull back the release tab
on the cart and push the //code.Node out of the cart using the hole on the
bottom of the cart.
2 3
Threaded Hole
4
For attaching bumpers from
the ME-9884 Bumper
Accessory Set.
String Tie (front and rear)
5
For attaching a string to pull
the cart.
Mass Bay (4 total)
6
For inserting masses from the
ME-8984 50-g Mass Set.
4
5