Adapters And Extensions For Compatibility With Non-Abbott Leads - Abbott Eterna 32400 Clinician Manual

The generator has the following operating parameters.
Table 4. Operating parameters for the generator
Parameter
Pulse width
Frequency
Burst frequency
Intra-burst rate
Amplitude
NOTE: Columns with * represent operating parameters for BurstDR™ stimulation programs on generators
capable of BurstDR stimulation mode.
NOTE: For each tonic program, you have the option to select the amplitude range. For information on
setting the amplitude range, see the clinician's programming manual for this system.
NOTE: The number of stim sets in use for a tonic program governs the maximum frequency (1200/
number of stim sets).
NOTE: The maximum current depends on the impedance, frequency, and pulse width settings.

Adapters and Extensions for Compatibility with Non-Abbott Leads

The Eterna™ implantable pulse generator is compatible with select Medtronic leads and extensions.
However, a compatible adapter or extension must be used to connect the Eterna™ implantable pulse
generator to Medtronic leads. Compatible adapter and extension models are listed in the following table.
Refer to the clinician manuals of the A127™ extension and the 8‑channel adapter for the list of compatible
Medtronic leads and extensions.
Table 5. Compatible Abbott Adapters
Device
A127™ Extension
8‑Channel Adapter
WARNING: Always use a compatible adapter to connect the Eterna™ implantable pulse generator to
compatible Medtronic leads and extensions. Do not insert a Medtronic lead or extension directly into
the Eterna generator header as this may damage the header.
Tonic Range Tonic Steps
20–1000 µs 10 µs
(20–500 µs range)
50 µs
(500–1000 µs range)
2–200 Hz 2 Hz
200–500 Hz 10 Hz
500–1200 Hz 20 Hz
— —
— —
0–25.5 mA 0.1–1.0 mA
0–12.75 mA 0.05–0.50 mA
Model
2341, 2342, 2343, 2346
2311, 2316
12
Burst Range* Burst Steps*
50–1000 µs 50 µs
— —
— —
— —
10–60 Hz 10 Hz
250–500 Hz 10 Hz
500–1000 Hz 20 Hz
0–12.75 mA 0.05–0.50 mA