Advertisement
33.6 Communicator with SimpleJack
Installation with OS/2 Warp
For installations with Windows 3.x,
Windows NT, Windows 95 or MacOS
System 7, refer to the other columns.
1 Start OS/2 Warp.
2 Plug in the modem.
3 Attach the phone line.
Lift the hinged top of the SimpleJack
connector and attach a phone line. If there is
no room to open the jack, slide the jack out
and attach the jack to the connector on the
right; then, attach the phone line.
If you find that the SimpleJack connector is
not appropriate to your application, you
may purchase a line access cable (P/N
STI-FAX/CCBL). Call 1-800-4SIMPLE for
ordering information. Refer to the User
Guide for instructions on how to install the
line access cable.
4 Use the 33.6 Communicator with
SimpleJack with your favorite OS/2 Warp
communications software.
Refer to the installation guide that came
with the communications software for
instructions on how to install and start the
communications software. Use the
communications software to send and
receive data and fax.
To use the voice capabilities of the 33.6
Communicator with SimpleJack, the
software must support voice features. Also,
your computer must have a microphone
and speakers or you must use the optional
line access cable with a compatible handset.
Refer to the User Guide for information on
the optional line access cable. Be sure to
configure the communications software for
the appropriate microphone and speakers.
5 You can remove the 33.6 Communicator
with SimpleJack when done.
Make sure the computer is not accessing
the 33.6 Communicator with SimpleJack,
then remove the 33.6 Communicator with
SimpleJack as follows:
A. Push the eject button on the computer
(if applicable).
B. Pull the 33.6 Communicator with
SimpleJack from the socket.
Page 4
Installation with MacOS System 7
For installations with Windows 3.x,
Windows NT or Windows 95 or OS/2
Warp, refer to the other columns.
1 Start MacOS System 7.
2 Plug in the 33.6 Communicator with
SimpleJack.
3 Attach the phone line.
Lift the hinged top of the SimpleJack
connector and attach a phone line. If there
is no room to open the jack, slide the jack
out and attach the jack to the connector on
the right; then, attach the phone line.
If you find that the SimpleJack connector is
not appropriate to your application, you
may purchase a line access cable (P/N
STI-FAX/CCBL). Call 1-800-4SIMPLE for
ordering information. Refer to the User
Guide for instructions on how to install the
line access cable.
4 Install and start the communications
software.
Refer to the installation sheet that came
with the communications software for
instructions on how to install and start the
communications software. Use the
communications software to send and
receive data and fax.
5 You can remove the 33.6 Communicator
with SimpleJack when done.
Make sure the computer is not accessing
the 33.6 Communicator with SimpleJack,
then drag its icon into the Trash. The 33.6
Communicator with SimpleJack is ejected.
If you experience any difficulties with the
installation, please contact Simple Tech-
nology Technical Support at the following:
• Tel: 714-476-1180
•
800-367-7330(US & Canada only)
• EMail: support@simpletech.com
• Web: http://www.simpletech.com
3001 Daimler Street, Santa Ana, California 92705
Document Part Number 60000-00020-003
Advertisement
