B-TEC Painty-02 Operating Manual

Mixing-and preparation table

Advertisement

Quick Links

Painty-02/-03/-04
Mixing- and Preparation Table
Operating Manual
for Mixing- and Preparation Table Painty
– Translation of German Original Document –
B-TEC GmbH • Zunftweg 6-8 • D-31303 Burgdorf / Ehlershausen • Tel.: +49(0)5085-97100-0
Fax: +49(0)5085-97100-30 • Email: info@btecsystems.de • www.btecsystems.de

Advertisement

Table of Contents
loading

Summary of Contents for B-TEC Painty-02

  • Page 1 Painty-02/-03/-04 Mixing- and Preparation Table Operating Manual for Mixing- and Preparation Table Painty – Translation of German Original Document – B-TEC GmbH • Zunftweg 6-8 • D-31303 Burgdorf / Ehlershausen • Tel.: +49(0)5085-97100-0 Fax: +49(0)5085-97100-30 • Email: info@btecsystems.de • www.btecsystems.de...
  • Page 2: Table Of Contents

    Exhaust Ducting Painty-03 ....................... 9 6.4. Compressed Air Connection ....................9 6.5. Grounding / Earthing ....................... 9 Safety Inspection Checklist ......................10 V2.2 B-TEC GmbH • Zunftweg 6-8 • D-31303 Burgdorf / Ehlershausen • Tel.: +49(0)5085-97100-0 Fax: +49(0)5085-97100-30 • Email: info@btecsystems.de • www.btecsystems.de...
  • Page 3: Important Information

    1. Important Information Thank you for the trust you placed in us by purchasing this B-TEC product. B-TEC products have been designed and manufactured to the highest quality standards for best operational safety. Read this document carefully before putting the device into operation and keep it for future reference.
  • Page 4: Intended Use

    / or supplier sales and delivery terms are not extended by the above notes. B-TEC warrants its products to be free from defects in materials and workmanship, for a period of 24 months on a one shift basis. In case of exceptional usage such as multiple-shift operation, the statutory warranty is shortened to 12 months (two-shift operation) or 8 months (three-shift operation).
  • Page 5: Operational Safety

    • The product may only be operated by trained personnel. Operators under the age of 18 are only allowed to operate the product when under supervision of an expert. For some users, hazard assessment activity restrictions may result, e.g. for persons with chronic respiratory problems or allergic diseases as well as for pregnant women or nursing mothers.
  • Page 6: Hazards From Pneumatic Energy

    • If clothing has been wetted with solvent / cleaning fluid, smoking is also prohibited outside the Ex-zone. Take off the contaminated clothing immediately. There is risk of skin irritation, aller- gies, etc. Persons wearing contaminated clothing must not be exposed to sources of ignition (e.g.
  • Page 7: Technical Description Of The Product

    3. Technical Description of the Product Painty-02/-03 The Painty-02/-03 is a mixing and preparation table with drain covered with gratings. Both models are equipped with: 4 x spray gun holder, 1 x paper roll holder, 1 x refuse sack holder.
  • Page 8: Zone And Product Classification According To Atex

    4. Zone and Product Classification according to ATEX This product does not have any ignition source and is therefore not subject to ATEX-Directive 2014/34/EU. Operation in an ex-zone (e.g. zone 1) is therefore possible. In accordance with legal requirements, the ATEX zone definition around the product and creation of an explosion protection document comes under the responsibility of the "responsible person of the company"...
  • Page 9: Transport And Installation

    6. Transport and Installation The product is delivered packed. Unpack the product outside an explosive atmosphere and bring it to the installation site. Install the product as described in the following sections. 6.1. Assembling Painty-02/-03 Mixing- and preparation table Painty Page 7...
  • Page 10: Exhaust Ducting Painty-02/04

    It’s recommended not to connect the product directly to a rigid pipe. Use at least 30-40 cm of the flexible B-TEC exhaust hose to ensure that the product can be relocated or repaired conveniently if necessary. Diameter of exhaust hose: Ø125 mm The exhaust air flow rate can be adjusted at the flow adjuster as needed depending on the length of the duct.
  • Page 11: Exhaust Ducting Painty-03

    6.3. Exhaust Ducting Painty-03 The Painty-03 comes without integrated extraction nozzle, but comes with a preparation for an on- site air extraction. The on-site air extraction can be connected to the Painty-03 with a Ø150 mm exhaust hose. The connection is on the roofe of the table. Figure 3 - Painty-03 - Extraction prepared for diameter 150mm 6.4.
  • Page 12: Safety Inspection Checklist

    7. Safety Inspection Checklist Please make copies before filling out for the first time! Safety inspections must be carried out at least once a year! Audit according to the applicable document regarding European Council Directive 2009/104/EC in the respective country. Model: __________________________ Year of construction:...

This manual is also suitable for:

Painty-03Painty-04

Table of Contents