Philips EasyKey 1000 Series User Manual page 13

Master fingerprint verification
LED in blue and
sound
Press the finger that needs to be
3
enrolled on the fingerprint sensor for
8 times. During the first 7 presses, the
buzzer will emit a short "beep" sound
and the blue light will flash twice.
On the 8th press, the buzzer will emit
two "beep" sound and the indicator will
flash green twice,
indicating successful enrollment and
automatic exit.
If the enrollment fails, the indicator will
flash red twice and the buzzer will emit
three "beep" sound.
emits a long "beep"
During the first 7 presses
LED flashes blue
short "beep" sound
LED flashes green twice and
two "beep" sounds
Attention
1. Non-master fingerprint is unable to
access the setting mode.
2. Registered fingerprint cannot be enrolled
again.
3. In the setting mode,no user interaction
for more than 10 seconds will trigger a
"beep" sound, a 2-second red light, and the
system will automatically exit the setting
mode.
twice and emits a
On the 8th press
emits
11