Table of Contents
Advertisement
Maiman Electronics
12. Pin and terminal functions
Please, note polarity!
Never ground any lead of the output,
this may cause permanent damage to the laser diode and the driver!
Never use any grounded probes (e.g. from the oscilloscope) at the output!
Control pins are not isolated!
Terminals
Please, pay attention to the markings!
Controls
Terminal Description
Vin+
Connect to the positive terminal of
the power supply.
Please, note polarity!
Vin-
Connect to the negative terminal of
the power supply.
Please, note polarity!
LD+
Connect to the laser diode anode.
Please note polarity!
Grounding this terminal may cause
permanent damage to the driver.
LD-
Connect to the laser diode cathode.
Please note polarity!
Grounding this terminal may cause
permanent damage to the laser
diode.
№
Description
1
Analogue control connector
2
Current limit adjustment
potentiometer (adjustment from
zero to maximum occurs in 12 turns)
3
Digital control connector
8
SF6040
Advertisement
Table of Contents
