Volvo S60 2019 Owner's Manual page 270

KEY, LOCKS AND ALARM
Private locking
The boot lid and rear seat backrest can be
locked with the private locking function when
the car is taken in for service, left at a hotel or
similar. The function prevents the boot lid
from being opened and locks the rear seat
backrest in upright position.
The private locking function
button is located in the cen-
tre display function view.
Depending on the current
status of the lock,
Locking Unlocked
Private Locking Locked
shown.
Related information
Activating and deactivating private locking
•
(p. 268)
268
Activating and deactivating private
locking
Private locking is activated with a function
button in the centre display and an optional
PIN code.
NOTE
The car needs to be in ignition mode I as a
minimum for the private locking function to
be activated.
Private
Private locking has two codes:
or
A security code is created the first time
•
is
the function is used.
A new PIN code is selected every time the
•
function is activated.
Enter the security code before using
for the first time
A security code needs to be selected during
the first time the function is used. It can then
be used to deactivate private locking if the
selected PIN code has been forgotten or lost.
The security code acts as a PUK code for all
subsequent PIN codes set for the private lock-
ing function.
Save the security code in a safe place.
To create a security code:
1. Press the button for private locking in the
function view.
> A pop-up window is shown.
2. Enter the preferred security code and
press Confirm .
> The security code is saved. The private
locking function is now ready for activa-
tion.
Activate private locking
NOTE
When private locking is activated, the rear
seat must be in upright position for locking
to work.