Page 2
See page 19 for details PRESSURE GAUGE READING RECORD Initial Reading Date Date Date Date Date Date Date Date Date Date Date Date Date Date Date Date Date Date SFG SERIES TOP MOUNT FIBREGLASS MEDIA FILTER INSTALLATION AND OPERATION MANUAL Page 1 of 23...
REPLACEMENT PARTS OF FILTER ..................16 SFG25-40 ..........................16 SFG25-50 ..........................17 SFG28-50, SFG32-50 & SFG36-50 ..................18 WARRANTY ........................... 19 TECHNICAL SUPPORT ......................20 NOTES ........................... 21 SFG SERIES TOP MOUNT FIBREGLASS MEDIA FILTER INSTALLATION AND OPERATION MANUAL Page 2 of 23...
Do not use or operate swimming pools, spas or spa baths if a suction cover is broken, missing or loose • Suction covers and inlets must be installed as per Australian Standards guideline and provided for every pump to avoid suction entrapment SFG SERIES TOP MOUNT FIBREGLASS MEDIA FILTER INSTALLATION AND OPERATION MANUAL Page 3 of 23...
• Finally, your entitlements under your product warranty. Oasis Aquatics have developed their product line to provide you with the ultimate experience and are sure you will be delighted with your purchase. Please note: This manual has been designed to cater for installation rules and codes in Australia.
Your Oasis Aquatics SFG Top Mount Fibreglass Media Filter is designed to use the high-quality filter elements such as Media or Glass to remove dirt particles from pool water. These elements are specifically designed for your Oasis Aquatics Media Filter and if looked after will provide you with years of trouble-free operation.
14. Make electrical connections to pump per pump instructions. 15. To prevent water leakage, make sure all pipe connections are tight. DO NOT OVER TIGHTEN. SFG SERIES TOP MOUNT FIBREGLASS MEDIA FILTER INSTALLATION AND OPERATION MANUAL Page 6 of 23...
Page 8
Prior to starting the filtration process by turning on the pump, we highly recommend that you read through the pump instruction manual to ensure proper installation and to avoid the risk of electric shock. SFG SERIES TOP MOUNT FIBREGLASS MEDIA FILTER INSTALLATION AND OPERATION MANUAL Page 7 of 23...
To prevent damage to the pump and filter and for proper operation of the system, clean pump strainer (basket) and skimmer basket(s) regularly. SFG SERIES TOP MOUNT FIBREGLASS MEDIA FILTER INSTALLATION AND OPERATION MANUAL Page 8 of 23...
Shuts off all flow to filter or pool Closed setting acts like a valve and prevents flow of water through the tank, particularly useful if doing any maintenance on the filtration system. SFG SERIES TOP MOUNT FIBREGLASS MEDIA FILTER INSTALLATION AND OPERATION MANUAL Page 9 of 23...
Heavy Soil, specific clean - set the control valve to WASTE position. If using the WASTE position, ensure that the pool water level is well above your skimmer box level as the water will be directed down the waste line. SFG SERIES TOP MOUNT FIBREGLASS MEDIA FILTER INSTALLATION AND OPERATION MANUAL Page 10 of 23...
SYSTEM TROUBLESHOOTING If you suspect for any reason your Oasis Aquatics SFG Top Mount Fibreglass Media Filter is not performing or running as it should be, here are some handy troubleshooting tips that may assist you.
Page 13
• Filter pump has lost prime Oasis Aquatics highly recommends regular checks and maintenance of your swimming pool equipment by a qualified pool professional. This will extend the life of your equipment and give you the best performance.
To get the best performance out of any of your pool equipment, it is important that you manage your water chemistry to the ideal swimming levels. This could vary according to your location and Oasis Aquatics highly recommend that you employ the services of your local pool professional to get your pool set-up to exactly what is required.
40 kPa or 6 PSI different from new filter, a Annually backwashed filter to initial pressure media change may be required. (when new) Consult with pool professional for advice. SFG SERIES TOP MOUNT FIBREGLASS MEDIA FILTER INSTALLATION AND OPERATION MANUAL Page 14 of 23...
1.5" (40mm) Union with Sight Glass Holder 89280120 Connector for Pressure Gauge/Stopper 89021307 Drain Plug with O-ring 06011029 Oil Pressure Gauge with O-ring 919305061 MPV01/MPV03 Upper part SFG SERIES TOP MOUNT FIBREGLASS MEDIA FILTER INSTALLATION AND OPERATION MANUAL Page 16 of 23...
2.0" (50mm) Connector (Black) 01171154 2.0" (50mm) Union (A/E) 01013032 2.0" (50mm) Union Nut (Black) 89280104 Sight Glass with O-Ring 02011005 O-Ring for Diffuser 919301023 MPV08 Upper part SFG SERIES TOP MOUNT FIBREGLASS MEDIA FILTER INSTALLATION AND OPERATION MANUAL Page 17 of 23...
89280104 Sight Glass with O-Ring 89280120 Connector for Pressure Gauge/Stopper 89021307 Drain Plug with O-ring 6011029 Oil Pressure Gauge with O-ring 919301014 MPV02 Upper part SFG SERIES TOP MOUNT FIBREGLASS MEDIA FILTER INSTALLATION AND OPERATION MANUAL Page 18 of 23...
This warranty is subject to the conditions and limitations herein after stated and is applicable to workmanship and materials only. You must notify Oasis Aquatics of the failure of any component of your product within seven (7) days of the recognised fault.
WARRANTY REGISTRATION Registering your Oasis Aquatics products is fast and easy, providing peace of mind that you’ve got great backup support for the life of your pool heating! •...
NOTES SFG SERIES TOP MOUNT FIBREGLASS MEDIA FILTER INSTALLATION AND OPERATION MANUAL Page 21 of 23...
Page 23
SFG SERIES TOP MOUNT FIBREGLASS MEDIA FILTER INSTALLATION AND OPERATION MANUAL Page 22 of 23...
Page 24
Seven Hills NSW 2147 Upper Coomera QLD 4209 Australia Australia Australia T: 03 9887 2131 T: 02 9838 0000 T: 07 5679 6821 oasisaquatics.com.au sales@sunloverheating.com.au SFG SERIES TOP MOUNT FIBREGLASS MEDIA FILTER INSTALLATION AND OPERATION MANUAL Page 23 of 23...