What Is The Akcp Air Velocity Transmitter?; Installation And Setup - AKCP SP2 Quick Start Manual

Air Velocity Transmitter Quick Start Guide

What is the AKCP Air Velocity Transmitter?

AKCP offers this air velocity sensor or transmitter as a sensor that is designed to be mounted in
air vents or air intake or outtake cooling ducts.
This sensor can measure the percentage of airflow and this reading can be displayed on our
sensorProbe or securityProbe base units web interface. The measurements can also be graphed
over time.

Installation and Setup

The first step in setting up the air velocity sensor would be to mount the sensor in the air duct
using the instructions included in the packaging for the sensor.
Next you would connect the RJ-45 connector from the sensor to the Intelligent Sensor port on
the back of the sensorProbe8 base unit.
Now login to the units web interface as the Admin and proceed as follows;
After logging into the base units web interface open the Summery page. The sensor will first be
auto detected as the DC Voltage sensor and the status will be critical as shown in the screen
shot above.
Click on the link in the Type column, the DC Voltage link.