1. Manuals
  2. Brands
  3. TKH Manuals
  4. IP Access Controllers
  5. Skilleye SEP-FRTMP03
  6. User manual

TKH Skilleye SEP-FRTMP03 User Manual

Temperatutemperature measurement & face recognition terminal re measurement & face recognition terminal
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SEP-FRTMP03
Temperature Measurement &
Face Recognition Terminal
User Manual
Please read this instruction carefully before operating the unit and keep it for further
reference

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Skilleye SEP-FRTMP03 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for TKH Skilleye SEP-FRTMP03

  • Page 1 SEP-FRTMP03 Temperature Measurement & Face Recognition Terminal User Manual Please read this instruction carefully before operating the unit and keep it for further reference...
  • Page 2 Temperature Measurement & Face Recognition Terminal User Manual Notes on Safety ◼ This product is intended to be supplied by a Listed Power Unit, marked with 'Limited Power Source', 'LPS' on unit, output rated minimum 12V/1 A, no more than 2000m altitude of operation and Tma=60 Deg.C.
  • Page 3 Temperature Measurement & Face Recognition Terminal User Manual Disclaimer ◼ With regard to the product with internet access, the use of product shall be wholly at your own risks. Our company shall be irresponsible for abnormal operation, privacy leakage or other damages resulting from cyber attack, hacker attack, virus inspection, or other internet security risks;...
  • Page 4 Temperature Measurement & Face Recognition Terminal User Manual 2012/19/EU (WEEE directive): The Directive on waste electrical and electronic equipment (WEEE Directive). To improve the environmental management of WEEE, the improvement of collection, treatment and recycling of electronics at the end of their life is essential. Therefore, the product marked with this symbol must be disposed of in a responsible manner.

  • Page 5: Table Of Contents

    Temperature Measurement & Face Recognition Terminal User Manual Table of Contents Introduction ........................1 Login & Network Connection ................... 2 Login ......................... 2 Network Configuration ..................... 3 1.2.1 LAN ........................3 1.2.2 WAN ......................... 6 Temp Measurement & FR Config ..................9 3.1 Temperature Measurement Settings ................
  • Page 6 Temperature Measurement & Face Recognition Terminal User Manual 6.3.5 Cable Disconnection ....................37 6.3.6 Alarm In ......................... 37 6.3.7 Alarm Out....................... 38 6.4 Network Configuration ....................39 6.4.1 TCP/IP ........................39 6.4.2 Port ......................... 41 6.4.3 Server Configuration ....................41 6.4.4 DDNS ........................

  • Page 7: Introduction

    Temperature Measurement & Face Recognition Terminal User Manual Introduction This series of product is specially designed and developed for face recognition and temperature measurement applications, featuring non-contract temperature measurement, high performance and reliability, faster recognition and higher accuracy rate. Based on deep-learning algorithm, it combines temperature measurement, identity authorization and access control.

  • Page 8: Login &Network Connection

    Temperature Measurement & Face Recognition Terminal User Manual Login &Network Connection 1.1 Login After the device is powered on and connected to the LAN, you will see the following interface. Tap the menu button to pop up a login box. Enter the username and password and tap “OK” to enter the main menu page as shown below.

  • Page 9: Network Configuration

    Temperature Measurement & Face Recognition Terminal User Manual 1.2 Network Configuration 1.2.1 LAN Network connection: There are two ways to set the network configuration. ⚫ Configuring the network via the terminal In the main menu page of the terminal, tap “Network Config” to go to the network config interface.
  • Page 10 Temperature Measurement & Face Recognition Terminal User Manual Please set IPv4 or IPv6 as needed. Here taking IPv4 network settings for example. You can enter IP address, subnet mask, gateway and DNS server manually or getthese network parameters by selecting obtaining IP address automatically. After that, tap to save the settings.
  • Page 11 Temperature Measurement & Face Recognition Terminal User Manual ③ Modify the IP address. The default IP address of this camera is 192.168.226.201. Click the information of the camera listed in the above table to show the network information on the right hand.

  • Page 12: Wan

    Temperature Measurement & Face Recognition Terminal User Manual The system will pop up the above-mentioned textbox to ask you to change the default password. It is strongly recommended to change the default password for account security. If “Do not show again” is checked, the textbox will not appear next time. 1.2.2 WAN Here only take IE browser for example.
  • Page 13 Temperature Measurement & Face Recognition Terminal User Manual IP Setup ③ Go to the router’s management interface through IE browser to forward the IP address and port of the camera in the “Virtual Server”. Router Setup ④Open the IE browser and enter its WAN IP and http port to access. (for example, if the http port is changed to 81, please enter “192.198.1.201:81”...
  • Page 14 Temperature Measurement & Face Recognition Terminal User Manual ① Go to Config→Network→Port menu to set the port number. ② Go to Config →Network→TCP/IP→PPPoE Config menu. Enable PPPoE and then enter the user name and password from your internet service provider. ③...

  • Page 15: Tempmeasurement& Fr Config

    Temperature Measurement & Face Recognition Terminal User Manual TempMeasurement& FR Config 3.1 Temperature Measurement Settings You can configure temperature measurement via the terminal or Web Client. Here we take the temperature measurement settings via Web Client for example. After the network is connected, go to the web client. Click Config→Temperature Measurement to go to the following interface.

  • Page 16: People Management

    Temperature Measurement & Face Recognition Terminal User Manual the corresponding voice prompt will be heard. If this item is disabled, the detected body temperature status will be not broadcasted. Trigger SD Snap: If enabled,the system will capture images on detecting an abnormal temperature and save the imageson an SD card.
  • Page 17 Temperature Measurement & Face Recognition Terminal User Manual ③ Set username, gender, group type, ID number, verification mode, etc. ④ Tap to add a face picture. The detailed face adding requirements referto the descriptions of Adding Face. ⑤ Tap to save settings.

  • Page 18: Face Match Settings

    Temperature Measurement & Face Recognition Terminal User Manual Adding Face： Face the camera and ensure your face picture in the middle of the face collecting window. Keep your expression naturally when collecting face pictures. Do not wear hat, sunglasses, or other objectsthat can affect the face recognition function. Do not make your hair cover your eyes, ears, etc.
  • Page 19 Temperature Measurement & Face Recognition Terminal User Manual Please set similarity threshold, deduplication period, snapshot interval, face exposure and white light mode as needed. You can also enter the face match configuration interface via Web Client to set. The setting steps are as follows. 1.

  • Page 20: Face Database Management

    Temperature Measurement & Face Recognition Terminal User Manual 3. Set snapshot interval.If 5 seconds is selected, the camera will capture the same target once every 5 seconds during its continuous tracking period. 4. Set alarm holding time and alarm trigger options. 5.
  • Page 21 Temperature Measurement & Face Recognition Terminal User Manual ② Adding multiple face pictures at a time Click and then add multiple face pictures once according to the prompted rules. Here is the example of the people information file (.CSV). Put the people information file and images into the same directory as shown on the below left. Click “Browse”...

  • Page 22: Mask Detection

    Temperature Measurement & Face Recognition Terminal User Manual ③ Add face pictures by using face album management tool ④ Add the captured picture in the live mode (SeeAdd captured face pictures to the face database). After adding face pictures, you can search them by name, gender, ID number and so on. Click “Modify”...
  • Page 23 Temperature Measurement & Face Recognition Terminal User Manual ① Enable “Mask Detection”as needed. ② Set the alarm holding time. ③ Set the alarm trigger options. Alarm Out: If enabled, alarm output will be triggered when the detected person doesn’t wear a mask.

  • Page 24: Live View

    Temperature Measurement & Face Recognition Terminal User Manual Live View 4.1 Temperature Measurement& Face Recognition View 4.1.1 Temperature Measurement Requirements For accuracy temperature measurement, here are some recommendations. The face image of the detected person shall be within the pre-defined face detection area. His/her forehead shall be in the middle of the “Temp zone”(make the green plus stay in the middle of the “Temp zone”).

  • Page 25: Temperature Measurement& Face Recognition View

    Temperature Measurement & Face Recognition Terminal User Manual temperature measurement sensor (5cm-20cm away from the temperature sensor) to get the accurate value. Please have a rest after strenuous exercise and then test the temperature. If there is sweat on the forehead, please wipe it and take a rest and then test the temperature. The installation height shall fit the height of the detected people.

  • Page 26: Live View Via Web

    Temperature Measurement & Face Recognition Terminal User Manual The system will measure the temperature and compare the captured face at the same time as shown below. When the captured face is not added to the face database or the similarity is lower than the pre- defined value, it will display “Match Failure”...
  • Page 27 Temperature Measurement & Face Recognition Terminal User Manual The following table is the instructions of the icons on the live view interface. Icon Description Icon Description Original size Start/stop local recording Fit correct scale Zoom in Auto (fill the window) Zoom out SD card recording indicator Full screen...
  • Page 28 Temperature Measurement & Face Recognition Terminal User Manual ⚫ View the comparison details In area ②, click the compared face picture to bring up the following window. In this interface, you can view the detailed comparison information. ⚫ Add captured face pictures to the face database Click a captured picture in area ①.

  • Page 29: Access Control Settings

    Temperature Measurement & Face Recognition Terminal User Manual Access Control Settings 5.1 Door Lock Settings Click Config→Access Control→Door Lock to go to the following interface. After the access control device is connected to the terminal, you can set unlocking mode in this interface. Unlocking Mode: four options--by face recognition, normal temperature, mask on, by password.

  • Page 30: Tampering Alarm Settings

    Temperature Measurement & Face Recognition Terminal User Manual Alarm Trigger Mode: Wiegand Input, Wiegand Output or Off can be selected. If the card reader is connected to the Wiegand interface, please select “Wiegand Input”. If the access controller is connected to the Wiegand interface, please select “Wiegand Output”. 5.3 Tampering Alarm Settings In order to avoid the removal or damage by the external force, the tampering alarm can be set for the terminal.

  • Page 31: Other Configurations

    Temperature Measurement & Face Recognition Terminal User Manual Other Configurations In the Webcam client, choose “Config” to go to the configuration interface. Note: Wherever applicable, click the “Save” button to save the settings. 6.1 System Settings 6.1.1 Basic Information In the “Basic Information” interface, the system information of the device is listed. Some versions may support device ID and QR code.

  • Page 32: Local Config

    Temperature Measurement & Face Recognition Terminal User Manual Select the time zone and DST as required. Click the “Date and Time” tab to set the time mode. 6.1.3 Local Config Go to Config→System→Local Config to set up the storage path of captured pictures and recorded videos on the local PC.
  • Page 33 Temperature Measurement & Face Recognition Terminal User Manual ⚫ SD Card Management Click the “Format” button to format the SD card. All data will be cleared by clicking this button. Click the “Eject” button to stop writing data to SD card. Then the SD card can be ejected safely.
  • Page 34 Temperature Measurement & Face Recognition Terminal User Manual Weekly schedule Set the alarm time from Monday to Sunday for a single week. Each day is divided in one hour increments. Green means scheduled. Blank means unscheduled. “Add”: Add the schedule for a special day. Drag the mouse to set the time on the timeline. “Erase”: Delete the schedule.

  • Page 35: Image Configuration

    Temperature Measurement & Face Recognition Terminal User Manual Set the format, resolution and quality of the image saved on the SD card and the snapshot interval and quantity and the timing snapshot here. Snapshot Quantity: The number you set here is the maximum quantity of snapshots. The actual quantity of snapshots may be less than this number.
  • Page 36 Temperature Measurement & Face Recognition Terminal User Manual Brightness: Set the brightness level of the camera’s image. Contrast: Set the color difference between the brightest and darkest parts. Hue: Set the total color degree of the image. Saturation: Set the degree of color purity. The purer the color, the brighter the image is. Sharpness: Set the resolution level of the image plane and the sharpness level of the image edge.

  • Page 37: Video / Audio Configuration

    Temperature Measurement & Face Recognition Terminal User Manual Exposure Mode: Choose “Auto” or “Manual”. If manual is chosen, the digital shutter speed can be adjusted. Gain Mode: Choose “Auto” or “Manual”. If “Auto” is selected, the gain value will be automatically adjusted according to the actual situation.

  • Page 38: Osdconfiguration

    Temperature Measurement & Face Recognition Terminal User Manual Click the “Audio” tab to go to the interface as shown below. Three video streams can be adjustable. Resolution: The size of image. Frame rate: The higher the frame rate, the video is smoother. Bitrate type: CBR and VBR are optional.

  • Page 39: Screen Brightness

    Temperature Measurement & Face Recognition Terminal User Manual Set time stamp, device name, OSD content and picture overlap here. After enabling the corresponding display and entering the content, drag them to change their position. Then click the “Save” button to save the settings. Picture Overlap Settings: Check “OSD Content1”, choose “Picture Overlay”...

  • Page 40: White Light Control

    Temperature Measurement & Face Recognition Terminal User Manual 6.2.5 White Light Control Click Config→Image→White Light Control to go to the following interface. White Light Mode: “OFF”, “Manual” or “Auto” is optional. In low illumination condition, this mode can be enabled. 6.2.6 Face Exposure To enable and set face exposure, please go to Config→Image→Face Exposure interface.
  • Page 41 Temperature Measurement & Face Recognition Terminal User Manual 1. Enable the applicable detection that’s desired. Scene Change Detection: Alarms will be triggered if the scene of the monitor video has changed. Video Blur Detection: Alarms will be triggered if the video becomes blurry. Enable Video Color Cast Detection: Alarms will be triggered if the video becomes obscured.

  • Page 42: Sd Card Full

    Temperature Measurement & Face Recognition Terminal User Manual 6.3.2 SD Card Full 1. Go to Config→Alarm→Exception→SD Card Full. 2. Click “Enable” and set the alarm holding time. 3. Set alarm trigger options. The setup steps are the same astemperature measurement settings.

  • Page 43: Ip Address Conflict

    Temperature Measurement & Face Recognition Terminal User Manual 6.3.4 IP Address Conflict 1. Go to Config→Alarm→Exception→IP Address Collision as shown below. 2. Click “Enable alarm” and set the alarm holding time. 3. Trigger alarm out. When the IP address of the camera is in conflict with the IP address of other devices, the system will trigger the alarm out.

  • Page 44: Alarm Out

    Temperature Measurement & Face Recognition Terminal User Manual 1. Select the sensor ID, click “Enable” and set the alarm type, alarm holding time and sensor name. 2. Set alarm trigger options. The setup steps are the same astemperature measurement settings. Please refer to temperature measurement settings chapter for details. 3.

  • Page 45: Network Configuration

    Temperature Measurement & Face Recognition Terminal User Manual trigger the alarm out immediately; click “Close” to stop alarm. Day/Night Switch Linkage: Having selected this mode, select the alarm type and then choose to open or close alarm out when the camera switches to day mode or night mode. Timing: Select the alarm type.
  • Page 46 Temperature Measurement & Face Recognition Terminal User Manual Use IP address (take IPv4 for example)-There are two options for IP setup: obtain an IP address automatically by DHCP and use the following IP address. Please choose one of the options as needed. Test: Test the effectiveness of the IP address by clicking this button.

  • Page 47: Port

    Temperature Measurement & Face Recognition Terminal User Manual 6.4.2 Port Go to Config→Network→Port interface as shown below. HTTP port, Data port and RTSP port can be set. HTTP Port: The default HTTP port is 80. It can be changed to any port which is not occupied. HTTPS Port: The default HTTPs port is 443.

  • Page 48: Ddns

    Temperature Measurement & Face Recognition Terminal User Manual 6.4.4 DDNS If the camera is set up with a DHCP connection, DDNS should be set for the internet. 1. Go to Config→Network→ DDNS. 2. Apply for a domain name. Take www.dvrdyndns.com for example. Enterwww.dvrdydns.com in the IE address bar to visit its website.

  • Page 49: Rtsp

    Temperature Measurement & Face Recognition Terminal User Manual 3. Enter the username, password, domain you apply for in the DDNS configuration interface. 4. Click the “Save” button to save the settings. 6.4.5 RTSP Go to Config→Network→RTSP. Select “Enable” to enable the RTSP function. Port: Access port of the streaming media.

  • Page 50: Upnp

    Temperature Measurement & Face Recognition Terminal User Manual Note:1. This camera support local play through a VLC player. Enter the RTSP address (unicast or multicast, eg. rtsp://192.168.226.201:554/profile1?transportmode=mcast) in a VLC player to realize the simultaneous play with the web client. 2.

  • Page 51: Ftp

    Temperature Measurement & Face Recognition Terminal User Manual Sender Address: sender’s e-mail address. User name and password: sender’s user name and password. Server Address: The SMTP IP address or host name. Select the secure connection type at the “Secure Connection” pull-down list according to what’s required.

  • Page 52: Https

    Temperature Measurement & Face Recognition Terminal User Manual Server Name: The name of the FTP server. Server Address: The IP address or domain name of the FTP. Upload Path: The directory where files will be uploaded to. Port: The port of the FTP server. User Name and Password: The username and password that are used to login to the FTP server.

  • Page 53: P2P (Optional)

    Temperature Measurement & Face Recognition Terminal User Manual * If there is a signed certificate, click “Browse” to select it and then click “Install” to install it. * Click “Create a private certificate” to enter the following creation interface. Click the “Create” button to create a private certificate. Enter the country (only two letters available), domain (camera’s IP address/domain), validity date, password, province/state, region and so on.

  • Page 54: Security Configuration

    Temperature Measurement & Face Recognition Terminal User Manual 6.5 Security Configuration 6.5.1 User Configuration Go to Config→Security→User interface as shown below. Add user: 1. Click the “Add” button to pop up the following textbox. 2. Enter user name in “User Name” textbox. 3.

  • Page 55: Online User

    Temperature Measurement & Face Recognition Terminal User Manual 1. Select a user to modify password and MAC address if necessaryin the user configuration list box. 2. The “Edit user” dialog box pops up by clicking the “Modify” button. 3. Enter the old password of the user in the “Old Password” text box. 4.

  • Page 56: Security Management

    Temperature Measurement & Face Recognition Terminal User Manual The setup steps are as follows: Check the “Enable address filtering” check box. Select “Block/Allow the following address”, IPv4/IPv6/MAC and thenenter IP address or MAC address in the address box and click the “Add” button. 6.5.4 Security Management Go to Config→Security→Security Management as shown below.

  • Page 57: Reboot

    Temperature Measurement & Face Recognition Terminal User Manual ⚫ Import & Export Settings Configuration settings of the camera can be exported form a camera into another camera. 1. Click “Browse” to select the save path for import or export information on the PC. 2.

  • Page 58: Operation Log

    Temperature Measurement & Face Recognition Terminal User Manual 1. Click the “Browse” button to select the save path of the upgrade file 2. Click the “Upgrade” button to start upgrading the firmware. 3. The device will restart automatically Caution!Do not close the browser or disconnect the camera from the network during the upgrade.

  • Page 59: Image Search

    Temperature Measurement & Face Recognition Terminal User Manual 7.1 Image Search Click Search to go to the interface as shown below. Images that are saved on the SD card can be found here. ⚫ Local Image Search Choose “Picture”—“Local”. Set time: Select date and choose the start and end time. Click to search the images.
  • Page 60 Temperature Measurement & Face Recognition Terminal User Manual ⚫ SD Card Image Search Choose “Picture”—“SD Card”. Set time: Select date and choose the start and end time. Choose the alarm events at the bottom of the interface. Click to search the images. Double click a file name in the list to view the captured photos.

  • Page 61: Video Search

    Temperature Measurement & Face Recognition Terminal User Manual 7.2 Video Search 7.2.1 Local Video Search Click Search to go to the interface as shown below. Videos were recorded locally to the PC can be played in this interface. Choose “Record”—“Local”. Set search time: Select the date and choose the start and end time.

  • Page 62: Sdcard Video Search

    Temperature Measurement & Face Recognition Terminal User Manual Icon Description Icon Description Play button. After pausing the video, click this button to Pause button continue playing. Stop button Speed down Speed up Watermark display Enable / disable audio; drag the slider to adjust the volume after enabling audio.
  • Page 63 Temperature Measurement & Face Recognition Terminal User Manual The time table can be shown in 24H/12H/2H/1H format by clicking the corresponding buttons. Video clip and downloading Search the video files according to the above mentioned steps. Select the start time by clicking on the time table. Click to set the start time and then this button turns blue ( Select the end time by clicking on the time table.

  • Page 64: Face Match Result Search

    Temperature Measurement & Face Recognition Terminal User Manual Face Match Result Search Click “Data Record” tab to go to the face recognition result search interface. Set the start time and end time and click “Search” to view the face recognition result. The capture face pictures, the body temperature and the snapshot time will be shown.

  • Page 65: Appendix

    Temperature Measurement & Face Recognition Terminal User Manual Red time tag means no comparison result. Green time tag means there is a comparison result. Click the picture with green time tag and then the face comparison information and body temperature can be viewed as shown below. Appendix Appendix 1Troubleshooting How to find the password?
  • Page 66 Temperature Measurement & Face Recognition Terminal User Manual ① Open IE browser and then click Tools-----Internet Options. ② Select Security------Custom Level…. ③ Enable all the options under “ActiveX controls and plug-ins”. ④ Click OK to finish setup. B. Other plug-ins or anti-virus blocks ActiveX. Please uninstall or close them. No sound can be heard.

  • Page 67: Appendix 2Specifications

    Temperature Measurement & Face Recognition Terminal User Manual Appendix 2Specifications Mode 2MP Temperature Measurement&Face Recognition Terminal Performance Embedded Linux Storage 8Gb DDR3 +16GB EMMC Screen Display Screen 8inch LCD touch screen; resolution: 1280x800; contrast: 500:1 Brightness 500 lux Control Interface Temperature Measurement Temperature 32~43℃...
  • Page 68 Temperature Measurement & Face Recognition Terminal User Manual Audio Output Built-in speaker Interface Network Interface 10/100Mbps self-adaptive Ethernet port x1 Alarm Input Alarm Output 2 CH Wiegand input/output（26/34） Wiegand Interface RS485 RS485x1 (half duplex) Door Lock Output Relay output, NO/NC(optional), delay setting supported SD Card Interface 1 micro SD card slot, up to 128G USB Interface...

Table of Contents