Table of Contents
Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
For Best Results,
Use 3.0 Amp Hour Battery
(Sold Separately)
20V CORDLESS
SPOTLIGHT
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2023 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
1917C-B
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
23g
56526
Advertisement
Table of Contents
Summary of Contents for Bauer HYPERMAX 1917C-B
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Important Safety Instructions
WARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Indicates a hazardous situation which, if not avoided, will result in death or serious injury. -
Page 3: Extension Cords
10. The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. -
Page 4: Specifications
Eye Injury. Wear ANSI-approved Do not puncture, short, or open safety goggles with side shields. battery packs and do not charge damaged battery packs. Specifications Bauer 20V Li-ion Battery Type (57007, sold separately) Bauer 20V Li-Ion Charger Type (57006, sold separately) - Page 5 Operating Instructions Read the ENTIRE IMPORTANT SAFETY INSTRUCTIONS section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Charging Charge battery after unpacking and before using this tool. Follow instructions included with the Charger (sold separately). Operating Instructions 1.
-
Page 6: Cleaning, Maintenance, And Lubrication
User-Maintenance Instructions Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Make sure that the Trigger is in the off-position and remove its Battery Pack before performing any procedure in this section. Cleaning, Maintenance, and Lubrication 1. - Page 7 Parts Lists and Diagram Part Description Part Description Lens Switch PCBA Reflector Contact Plate Holder Isolating Washer Fixed Holder (L) Screw Housing (L) Fixed Holder (R) Heat Sink Housing (R) Trigger Screw Trigger Holder M4 Nut PCBA Record Product’s Serial Number Here: Note: If product has no serial number, record month and year of purchase instead.
-
Page 8: Limited 90-Day Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.