Page 1: Table Of Contents
1.1 Install Ecowitt app ............. 5 1.2 Pair the GW2000 hub ..........6 1.2.1 Power on the GW2000 ........6 1.3 Pair the WFC01 with the hub ........10 1.3.1 Power on ............10 1.3.2 Test ..............10 1.3.3 Enter the network configuration mode ..... 10 1.3.4 Pair with hub .............10...
Page 2 4.8 Accessory List ............20 4.9 Specifications ............20 5 Product Structure ............22 6 Software Functions ............22 6.1 Watering Methods ............ 22 6.2 Operation Modes ............23 6.2.1 Timer Button Mode ...........24 6.2.2 Manual Watering Mode ........24 6.2.3 Plan mode ............27 7 Alerts ................31 No Water! ............
Page 3 Help Our product is continuously changing and improving, particularly online services and associated applications. To download the latest manual and additional help, please contact our technical support team: support@ecowitt.com...
Page 4 Brief Instruction Quick Guide on how Ecowitt system works...
Page 5: Specific Operation Instructions
* step4 is used when you have any other ecowitt sensors or for future use. 1 Specific Operation instructions 1.1 Install Ecowitt app App Download https://api.ecowitt.net/api/app/download a. Install ecowitt app b. Register and log in c. Make sure the app has (precise) location and WiFi service enabled d.
Page 6: Pair The Gw2000 Hub
Power on the GW2000. 2. Enter the network configuration mode Hold the button of GW2000 for 5s, led will flash rapidly. 3. Open ecowitt app, click add New Weather Station Tap "menu" - "weather station" - "+ add a new weather station".
Page 7 4. Connect to the Hotspot GW2000 emits...
Page 8 5. Fill the WiFi SSID and Password 6. Switch the WiFi of your phone to the GW2000 is connected to...
Page 9 * If any problem occurs, video with the QR code instruction will help.
Page 10: Pair The Wfc01 With The Hub
1.3 Pair the WFC01 with the hub 1.3.1 Power on Unscrew the 4 screws on the battery door on the back, and put in 2 AA batteries. The blue light on the front indicates that the device is powered on normally, and screw on the screws.
Page 11 1. Add a Subdevice 2. Click ‘Device is in pairing mode’ Make sure WFC01 is in network configuration mode.
Page 12 3. Wait for about 20 seconds and the pair will be success...
Page 13: Activate Other Sensors Into Gw2000 Hub System
WFC01 1.4 Activate other sensors into GW2000 hub system 1. Step4 is used when you have any other ecowitt sensors or for future use. 2. Make sure your phone is connected to the same WiFi GW2000 is connected to.
Page 14: Mount Of Wfc01
ID matched. 4. Tap "..." from dashboard top right corner, go to "sensor ID" page. 2 Mount of WFC01 Connect the water inlet and outlet pipes according to the direction of the arrow on the back of the product and fix...
Page 16: Product Overview
3. This product can be set up in the Ecowitt APP and can be linked with Ecowitt Soil Moisture Sensors to enable automatic irrigation. It is also possible...
Page 17 100 meters in an open area. Remote control is possible through the Ecowitt APP, allowing you to control your water timer anytime and anywhere. The radio status can be further monitored by the app with both device’s RSSI level.
Page 18: Product Specifications
4 Product Specifications 4.1 Size L159 * W82 * H45mm 4.2 Weight Weight: 520g...
Page 19: Material And Protection Level
4.3 Material and Protection Level Shell Material: ABS+PC Inlet Interface Material: Brass (CU) Outlet Interface Material: Brass with Chrome Plating Waterproof / Dustproof Level: IP66 4.4 Power Supply and Power Power Supply: 1.5V AA x 2 Power: 1.5mW (Average power of opening and closing once a day) Battery Runtime: Over 6 months (Average runtime of opening and closing once a day)
Page 20: Working Temperature And Humidity
1 x 3/4" to 1/2"Adapter 1 x Retaining bracket 2 x Nylon cable ties 3 x Screws 4.9 Specifications Product Name : Smart Water Timer Product Model : WFC01 Product Size : 159×82×45(mm) | L×W×H Weight : 520g Shell Material : ABS+PC...
Page 21 Inlet Material : Brass Outlet Material : Brass + Chrome Plating Waterproof Level : IP66 Power Supply : 1.5V AA Battery × 2 Power : 1.5mW (Average power of opening and closing once a day) Battery Runtime : Over 6 months (Average runtime of opening and closing once a day) Interface Type...
Page 22: Product Structure
5 Product Structure 6 Software Functions 6.1 Watering Methods 1. By duration Set a duration. Open the timer and it will automatically be closed after running for the set opening duration.
Page 23: Operation Modes
2. By quantity Set the amount of water. Open the timer and it will automatically be closed when the set quantity is reached. 3. Always on Keep the timer always on until another manually off operation(press button on faucet or APP) is carried out.
Page 24: Timer Button Mode
6.2.1 Timer Button Mode 1. Short Press Execute Manual Watering or terminate the current program. 2. Long Press for 5s Enter the network configuration mode. 3. Long Press for 10s Restore factory settings. 6.2.2 Manual Watering Mode 1. Timer open state Click the RUN button to turn off.
Page 25 duty cycle can be used to regulate more precisely for lower water rate application. On/off time: 5 ~ 3600 seconds. By duration Duration Range: 43200 seconds or 720 minutes. Click Confirm to execute current setting.
Page 26 B. By quantity Volume Range: 1 ~ 6500 L. Click Confirm to execute current setting. C. Always On Click Confirm to execute Always On setting.
Page 27: Plan Mode
6.2.3 Plan mode You can set a plan to start, and the plan can be set up to 24 start times. 1. Click plan to enter the Plan mode. 2. Click the right button to activate or deactivate a plan.
Page 28 Skip function is under development, and user defined skip condition can be edited here. (Currently this feature is not implemented, but it will be available in the next upgrade). 3. Click the left icon to enter the plan editing interface. 4.
Page 29 B. Set the method of watering. By Duration or by volume...
Page 30 C. Select the Cycle Mode Cycle Mode; Can be set as on/off; On/off time range: 5 ~ 3600 seconds. D. Set the repeat mode of watering. By weekly or by daily...
Page 31: Alerts
7 Alerts There are 5 kinds of alerts. The details of the alerts can be inquired below. No Water! No water detected a while after the Water Timer has been open. Please check if the water source is sufficient.
Page 32: Water Leakage
Water Leakage! Water Flow still detected after the Water Timer has been closed. Please ceheck the equipment immediately for leaks. Ice Alert! Current temperature below 5℃ (41℉). Ice formation may be caused. Overheating! Current temperature above 60℃ (140℉). Safety threat may be caused.
Page 33: Note
8 Note 8.1 Installation The smart water timer should be installed in a dry and well-ventilated location, avoiding prolonged exposure to humid, high or low temperature, or harmful gas environments. The installation position should be as close as possible to the water source or the water pipe that needs to be controlled, and avoid excessive bending or twisting of the water pipe.
Page 34: Precautions During Use
pay attention to cleaning the water timer and its surrounding area to prevent the accumulation of dust and dirt. Also, remember to replace the batteries promptly. 8.4 Precautions during use When using the smart water timer, do not use it for substances other than liquids.
Page 35 All trademarks and patents are recognized. We provide a 1-year limited warranty on this product against manufacturing defects, or defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased, and only to the original purchaser of this product.

ECOWITT WFC01 User Manual

Quick Links

Need help?

Questions and answers

Related Manuals for ECOWITT WFC01

Summary of Contents for ECOWITT WFC01

Table of Contents