Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for EnviroGuard PRO X
- Page 1 The Science of Air Quality User Manual V1.1...
-
Page 3: Safety Precautions And Warnings
Safety Precautions & Warnings Precautions for setting up and using your device... - Page 4 Avoid contact of gel with eyes and skin. Wear eye protection and protective gloves when handling. Refer to SDS for other safety information. EnviroGuard Purox™ Gel is an irritant. Avoid contact of gel with eyes and do not swallow. Refer to SDS for other safety information.
- Page 5 DO NOT place the device below an air conditioner to prevent condensation from dripping onto the device. Only use the EnviroGuard PrimeProtect™ Filter designed specifically for this device. Avoid knocking against the device (the air inlet and outlet in particular) with hard objects.
- Page 7 Setting up EnviroGuard PRO X™ Everything you need to get your device setup...
-
Page 8: Product Overview
EnviroGuard PRO X™ Lid Use to replace Purox™ Gel and adjust evaporation rate. Power Cable Use to plug EnviroGuard PRO X™ to a power supply. Purox™ Gel Evaporation Indicator Set the amount of Gel that is evaporated into the air. - Page 9 EnviroGuard PRO X Purox Evaporation Indicator Manual Controls Halo Light Ring PrimeProtect Filter Door Power Cable (behind)
- Page 10 Setting up EnviroGuard PRO X PrimeProtect Filter IMPORTANT: Upon purchase each EnviroGuard PRO X™ device comes with an EnviroGuard PrimeProtect™ Filter preinstalled. Please note: Replacement EnviroGuard PrimeProtect™ Filters can be purchased through your EnviroGuard PRO X™ supplier of choice.
- Page 12 Setting up EnviroGuard PRO X Purox™ Gel Setup IMPORTANT: Prior to handling the EnviroGuard Purox™ please wear protective gloves and eyewear. Wash hands after handling. Remove Purox container lid Remove EnviroGuard PRO X Remove container lid carefully to reveal gel. DO NOT touch gel.
- Page 13 Insert open container into Place EnvioroGuard PRO X Purox chamber Lid back onto device. DO NOT pour contents into Push down gently and rotate Purox™ gel chamber. clockwise to lock into place. Wash hands once complete.
-
Page 14: Device Setup
Setting up EnviroGuard PRO X EnviroGuard Pro X™ Device Setup Turning on your device and connecting to the EnviroGuard App. Press Power Button Plug in device The device will turn on. Connect device to a power source. - Page 15 Download the App Connect App with device Download EnviroGuard App Hold Mode and Plus for from App Store or Google play. 3 seconds to connect via Bluetooth.
- Page 17 Using EnviroGuard PRO X™ Control and Monitor...
- Page 18 When first turning on your EnviroGuard PRO X™ device, it is good practice to have the evaporation set to the highest level to achieve the desired reduction of airborne and surface pathogens. You can turn this setting down as required.
- Page 19 Evaporation Indictator...
- Page 20 Using EnviroGuard PRO X Halo Light Ring The EnviroGuard PRO X™ Halo Light Ring illuminates with a white spin automatically when the device is turned on. It then becomes a solid colour based on air quality. The Halo Light Ring also gives you visual signals about your device.
-
Page 22: Manual Controls
Using EnviroGuard PRO X Manual Controls Manual controls allow you to operate the device through the use of four push buttons. Boost mode allows you to rapidly clean the air. This should be used when the device is in a new environment or has been inactive for a period of time. - Page 23 Power Night Mode Minus Plus...
- Page 24 Changing EnviroGuard PRO X Consumables Purox™ Replacement The EnviroGuard PRO X device Halo Light Ring will indicate (pulsing yellow) when the EnviroGuard Purox gel requires replacing. Remove replacement Purox Remove EnviroGuard PRO X container lid Remove lid carefully from the Gently push down and rotate container to reveal gel.
- Page 25 IMPORTANT: Prior to handling the EnviroGuard Purox™ please wear protective gloves and eyewear. Wash hands after handling. NOTE: Place new lid on used gel containter prior to disposal of used container. Insert open container into Place EnviroGuard PRO X Purox chamber Lid back onto device.
-
Page 26: Filter Replacement
Changing EnviroGuard PRO X Consumables PrimeProtect Filter Replacement The EnviroGuard PRO X™ device Hao Light Ring will indicate (pulsing aqua) when the EnviroGuard PrimeProtect™ Filter requires replacing. Remove filter Open filter door Avoid touching the filter fabric. Place finger under arrow and pull to open door. - Page 27 filter at all times. Wear protective gloves prior to commencement of filter change. Wash hands thoroughly after changing the EnviroGuard Prime Protect Filter. it is good practice to wipe the filter chamber with a clean, dry cloth when changing filters.
-
Page 28: Cleaning And Maintenance
Cleaning EnviroGuard PRO X Cleaning and Maintenance Note: Always unplug the device before cleaning. Never immerse the device in water or any other liquid. Never use abrasive, aggressive, or flammable cleaning agents such as bleach or alcohol to clean any part of the appliance. - Page 30 (d) any Product from which the serial number has been removed; (e) modification to the product or services carried out on the Product by anyone other than EnviroGuard or EnviroGuard’s authorised service provider (if applicable);...
- Page 31 (e) Products that are authorised to be returned to EnviroGuard in Australia must include all of the following: (i) A completed Return Authorisation form (ii) A copy of your Proof of Purchase (iii) The faulty product, including all accessories (f) Send approved returns to EnviroGuard at the address specified in paragraph 5(a).
- Page 32 EnviroGuard Technologies Pty Ltd 3-11 Primrose Avenue, Rosebery, NSW 2018, Australia Customer Support: 1800 849 104 Website: enviroguardair.com...
Need help?
Do you have a question about the PRO X and is the answer not in the manual?
Questions and answers