Problem
Possible Cause
The fuse is
disconnected
The power
does not
turn on
Device is not properly
connected
The system
does not
The vehicle battery is low
play
Countermeasure
• Replace with a suitable fuse
• If the fuse is disconnected
again, please contact
your point of purchase or
Hyundai dealer
• Check to see that the device
has been properly con-
nected
• Charge the battery If the
problem persists, contact
your point of purchase or
Hyundai dealer
Problem
Possible Cause
• The brightness,
The image
saturation, hue, and
color/tone
contrast levels are
quality is low
not set properly
• The volume level
is set to the lowest
level
• The connection is
not proper
Sound does
• The device is
not work
currently fast-for-
warding, rewinding,
scanning, or playing
in slow mode
• Vibration is occur-
ring from where the
The sound or
conversion switch
image quality
has been installed
is low
• Image color/tone
quality is low
Countermeasure
• Properly adjust the bright-
ness, saturation, hue, and
contrast levels through
Display Setup
• Adjust the volume level
• Check to see that the device
has been properly
connected
• The sound will not work
when the device is
fast-forwarding, rewinding,
scanning, or playing in slow
mode
• The sound may be short-
circuited and the image
distorted if the device
vibrates
• The device will return to
normal once vibrations stop
Appendix I 10-5