Page 1
USER GUIDE Multi-Format Memory Card Reader NS-CR20A1/NS-CR20A1-C Before using your new product, please read these instructions to prevent any damage. Before using your new product, please read these instructions to prevent any damage.
Insignia Multi-Format Memory Card Reader NS-CR20A1/NS-CR20A1-C Important safety instructions Before getting started, read these instructions and save them for later reference. • Before you plug your card reader into your computer, read this user guide. In some operating systems, the driver must be installed before you install your card reader.
Insignia Multi-Format Memory Card Reader NS-CR20A1/NS-CR20A1-C Card slots This diagram shows the correct slots for the different types of media cards supported. Refer to the following section for additional details. USB connector CF card slot M2 card slot SD/MMC card slot...
Insignia Multi-Format Memory Card Reader NS-CR20A1/NS-CR20A1-C Media Card Image Details Card Slot SD/SDHC/ Insert Secure Digital card (SD, SDHC, SDXC, SDXC/ Mini SD), MultiMediaCard (MMC, MMCplus, RS-MMC), or xD MMC/ picture card into this slot. MMC+ Notes: - A memory card adapter is required for Mini SD and RS-MMC.
Page 6
Insignia Multi-Format Memory Card Reader NS-CR20A1/NS-CR20A1-C To remove a memory card using Windows: Caution Do not insert or remove memory cards while the blue data LED on the reader is flashing. Doing so may cause damage to your card or loss of data.
Page 7
Insignia Multi-Format Memory Card Reader NS-CR20A1/NS-CR20A1-C Formatting a memory card (Windows) Caution Formatting a memory card permanently deletes all files on the card. Be sure that you copy any valued files to a computer before formatting a memory card. Do not disconnect the card reader or remove the memory card while formatting is in progress.
Insignia Multi-Format Memory Card Reader NS-CR20A1/NS-CR20A1-C Troubleshooting If memory cards do not appear in My Computer/Computer (Windows operating systems) or on the desktop (Mac operating systems), check the following: • Make sure that the memory card is fully inserted into the slot.
Insignia Multi-Format Memory Card Reader NS-CR20A1/NS-CR20A1-C Specifications Supported file systems FAT 12/16/32, NTFS Six memory card slots CF slot xD slot SD/SDHC/MMC slot MS Pro Duo/MS Pro slot microSD slot M2 slot Indicators Card detected: Blue LED on Data access: Blue LED flashing Supported cards CompactFlash (I &...
Page 10
Insignia Multi-Format Memory Card Reader NS-CR20A1/NS-CR20A1-C • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to...
Products and parts replaced under this warranty become the property of Insignia and are not returned to you. If service of Products or parts are required after the Warranty Period expires, you must pay all labor and parts charges. This warranty lasts as long as you own your Insignia Product during the Warranty Period.
Page 12
FOR THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR PRODUCT, LOST BUSINESS OR LOST PROFITS. INSIGNIA PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, ALL EXPRESS AND...
Page 13
1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico) 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico) www.insigniaproducts.com www.insigniaproducts.com INSIGNIA is a trademark of Best Buy and its affiliated companies. Registered in some countries. Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A.
Need help?
Do you have a question about the NS-CR20A1-C and is the answer not in the manual?
Questions and answers