LG Minibeam Nano PH300B Owner's Manual page 24

Table of Contents

Advertisement

24
USING THE PROJECTOR
If you do not intend to use the projector for a long time, leave the battery
charged at 40 % - 50 %.
The battery is automatically recharged when the projector is connected
to a power supply.
Charge the battery fully when you first use the projector.
The battery standard usage time given in the manual is based on
measurements taken by LG; the actual time may vary depending upon
usage.
Battery usage time may vary depending on broadcast type, operating
temperature, period of use, and user preferences.
As the battery is consumable, its lifetime gradually decreases. When the
battery's life is reduced by half, replace it with a new battery from an LG
Electronics customer center.
Do not charge the battery using any equipment other than that supplied
with the product. This may damage the battery or cause a fire.
Always use a battery that is approved and certified by LG Electronics,
Inc. Failure to do so may result in an explosion or fire.
If the battery is leaking or giving off an odor, discontinue its use
immediately and contact LG Electronics Customer Support Center.
The battery contains lithium-ion, so please handle with care. Failure to
do so may result in an explosion or fire.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Minibeam nano ph300

Table of Contents