Summary of Contents for Zenty ZT-199
- Page 1 Zenty | Professional A/V Solution Provider ® ZENTY 9807 EMILY LANE STAFFORD, TX 77477 (844) 200-1945 SUPPORT@ZENTY.COM (844) 200-1945 | sales@zenty.com Page 1 of 16 Copyright © Zenty AV...
-
Page 2: Safety Precautions
Unplug the power cord when left unused for a long period of time. ⚫ Information on disposal for scrapped devices: do not burn or mix with general household waste, ⚫ please treat them as normal electrical wastes. (844) 200-1945 | sales@zenty.com Page 2 of 16 Copyright © Zenty AV... - Page 3 (844) 200-1945 | sales@zenty.com Page 3 of 16 Copyright © Zenty AV...
- Page 4 (844) 200-1945 | sales@zenty.com Page 4 of 16 Copyright © Zenty AV...
- Page 5 Convection cooler, fan is not needed. ⚫ Antistatic case design: providing good protection for long-term and stable performance. ⚫ • (1) x ZT-AP40 (The mounting ears and ZT-AP40 are as a whole.) (844) 200-1945 | sales@zenty.com Page 5 of 16 Copyright © Zenty AV...
- Page 6 • Please confirm if the product and the accessories are all included, if not, please contact with the dealers. The default output of amplifier is 2x20Watt@4Ohm, so user can connect the amplifier output in the regular way. As the picture below (844) 200-1945 | sales@zenty.com Page 6 of 16 Copyright © Zenty AV...
- Page 7 The ZT-AP40 also has the function of double-mono output. It can sum up the left and right channel, to be the mono audio output. In this way, the both of the outputs are showing the same mono audio. The connection is: (844) 200-1945 | sales@zenty.com Page 7 of 16 Copyright © Zenty AV...
- Page 8 “╧” connects to ground, and “-” connects to signal. “╧” connects to ground, and “+” connects to signal. 2) Balanced connection: “+” connects to positive, “-” connects to negative and “╧” connects to ground. (844) 200-1945 | sales@zenty.com Page 8 of 16 Copyright © Zenty AV...
- Page 9 The line volume and MIC volume can be controlled by the buttons. The MIC Volume/LINE volume/LINE bass/LINE treble will be selected by the buttons, and controlled up/down/mute by the function buttons. Please check the picture below: (844) 200-1945 | sales@zenty.com Page 9 of 16 Copyright © Zenty AV...
- Page 10 (844) 200-1945 | sales@zenty.com Page 10 of 16 Copyright © Zenty AV...
- Page 11 Communication Protocol: RS232 Communication Protocol Baud rate: 9600 Data bit: 8 Stop bit: 1 Parity bit: none (844) 200-1945 | sales@zenty.com Page 11 of 16 Copyright © Zenty AV...
- Page 12 [00] to [60]. 61 degrees in total. Volume of MIC: 50 Preset line volume, [xx] 7[x][x]% arranges from [00] to [60]. 61 degrees in total. Volume of LINE: 50 (844) 200-1945 | sales@zenty.com Page 12 of 16 Copyright © Zenty AV...
- Page 13 1 3.5mm jack 1 3.5mm jack Input Output 1 pluggable 1 pluggable Connector Connector terminal block (4P, terminal block 5.08mm) (3P,3.81mm), Input Output 50Ω/stereo, >10KΩ Impedance Impedance 4~8Ω/Amplifier Audio General (844) 200-1945 | sales@zenty.com Page 13 of 16 Copyright © Zenty AV...
- Page 14 Power 2x20 Watts (4 Voltage Gain 32dB Output Ohms) Control Function RS232 3-hole phoenix Panel Optional button Control connector Control control IR Remote Optional IR remote (844) 200-1945 | sales@zenty.com Page 14 of 16 Copyright © Zenty AV...
- Page 15 The items listed are not exclusive, but are for illustration only.) PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY. (844) 200-1945 | sales@zenty.com Page 15 of 16 Copyright © Zenty AV...
- Page 16 WWW.ZENTY.COM 9807 EMILY LANE STAFFORD, TX 77477 (844) 200-1945 SUPPORT@ZENTY.COM SALES@ZENTY.COM (844) 200-1945 | sales@zenty.com Page 16 of 16 Copyright © Zenty AV...