Technical Data - THOMSON CF20A02 Operating Manual

58
Milk foam is not prepared.
The automatic milk system sprays
the milk.
The descaling indicator continues
to flash even after the descaling
process.

Technical data

Model:
Rated supply voltage:
Pump pressure
Power
Container for coffee beans
Water tank
Commissioning and storage
Dimensions (mm) H x W x D
Weight, kg
Weight and dimensions are given approximately. Since we are constantly striving to improve
our products, we may change the technical characteristics and design without prior notice.
- The automatic milk frother is dirty,
improperly assembled or installed.
- The opening of the milk tube
connector is clogged with milk
residues.
- The type of milk used is not suitable
for whipping.
- The milk temperature is too high
The flexible milk feeding tube is not
inserted into the appliance.
The descaling process has not been
completed.
CF20A02
220-240 V, 50/60 Hz
19 bar
1470 W
150 g
1.2 L
Store indoors, in a dry place
(protected from freazing).
314 Х 180Х 407
8.5 kg
Operating manual
- Clean the automatic milk frother and
make sure it is properly assembled
or installed.
- See the section «Daily cleaning of
the appliance», follow the instructions
«Cleaning the automatic milk
preparation system».
- Clean the connector and make sure
that all the holes on the connector
are clean. Use a hook and brush to
clean the hole.
- Different types of milk lead to
different amounts of foam and
different quality.
- Use chilled milk.
Insert the flexible tube correctly.
Be patient and wait for the process
to complete. The machine will turn
off automatically, do not turn it off
manually.