Setting Up Your Monitor; Assembling Your Monitor - Lenovo ThinkCentre Flex 22i User Manual

Table of Contents

Advertisement

Setting up your monitor

This section provides information to help you set up your monitor.

Assembling your monitor

To assemble your monitor, follow the Two parts below one by one:
Part 1: Install the full-function monitor stand.
Part 2: Install the Tiny.
Part 1: Install the full-function monitor stand
Note: The full-function monitor stand includes one monitor stand and one stand base.
1. Place a soft, clean towel or cloth on the desk or surface. Hold the sides of your monitor and gently lay it
down so that the screen is against the surface and the cover is facing up.
2. Insert the three metal studs on the base into the corresponding holes in the stand. Then, tighten the screw
as shown to secure the stand.
3. Insert the two metal tabs on the stand into the corresponding holes on the rear of the monitor. Then, pivot
the stand downward until it clicks into position.
1-6 TIO Flex 22i Flat Panel Monitor User's Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

12bl

Table of Contents