Sony PSP-3008 Safety And Support page 9

Handling and care of exterior surfaces
Follow the guidelines listed below to help avoid deterioration or
discolouration of the PSP™ system:
• Do not use solvents or other chemicals to clean the exterior surface.
• Do not allow the system to remain in direct contact with rubber or
vinyl products for an extended period of time.
• Do not use a chemically-treated cleaning cloth to wipe off the
system.
Before using the analog stick
• Do not attempt to remove the analog stick from the system front, as
doing so will damage the system and may result in injury.
• For best results, go to (Settings)
and then with the "System Information" screen displayed, rotate the
analog stick in a circular motion. This will adjust the analog stick's
range of movement.
Cleaning
For safety reasons, unplug the AC Adaptor from the electrical outlet,
disconnect any other cables and remove the Battery Pack from the
system before cleaning.
Cleaning the exterior surface and LCD screen
Wipe gently with a soft cloth.
Cleaning the connectors
If the headphones or remote control connectors become dirty, this
could cause noise or interruptions in sound. Wipe the connectors with
a dry, soft cloth to keep in clean condition.
(System Settings),
GB
9
Precautions