Hitachi SJ700-055-110LF 2 Series Service Manual page 26

Key operation and transition of the
codes on display
Pressing the or
1 2
increases or decreases the numerical data displayed in data display mode.
Press the or key until the desired code or numerical data is shown. To scroll codes or
1 2
increase/decrease numerical data faster, press and hold the key.
All manuals and user guides at all-guides.com
Key operation and transition of the monitored data on display
key respectively scrolls up or down the code displayed in code display mode or
Monitor mode
Pressing the
FUNC
monitored data corresponding to the function code.
FUNC
or
FUNC STR
Pressing the
FUNC
to the display of the function code corresponding to the monitored data.
* With the factory setting, the monitor shows
power-on.
Pressing the
FUNC
Function or extended function mode
Pressing the
FUNC
corresponding to the function code.
(*1)(*2)
(Data display)
Up to the
maximum limit
FUNC
FUNC
or
STR
Down to the
minimum limit
1 - 22
key with a function code displayed shows the
(Monitor display) (*1)
or key with the monitored data displayed reverts
STR
key in this status changes the display to
key with a function code displayed shows the data
Data setting
Pressing the or
1 2
decreases the displayed numerical data.
(Press the key until the desired data is shown.)
Pressing the key with numerical data displayed
STR
stores the data and then returns to the display of the
corresponding function code.
Note that pressing the
FUNC
displayed returns to the display of the function code
corresponding to the numerical data without updating
the data, even if it has been changed on display.
*1 The content of the display varies depending on the
parameter type.
*2 To update numerical data, be sure to press the
key after changing the data.
STR
initially after
key respectively increases or
key with numerical data
.