Setting Tv Channels; Selecting Broadcast (Air) Or Cable Tv (Cable) For Channel Setting - Sharp LD-26SH3U Operation Manual

The following table shows the channels this TV
can receive.
VHF Channels 2 through 13
UHF Channels 14 through 69
Channel 1 (HRC and IRC mode only)
Cable
Channels 2 through 125 (STD, HRC, and IRC)
(You must subscribe to a cable TV service to
receive cable channels.)
When you first receive this TV, it has no memory of
any channels. To receive channels, perform the EZ
Setup (see page E20) after the first power-on, or
use "CH Setup" in the Setup menu.
Channel setting methods
There are two ways to set channels.
Automatically setting channels you can receive
(CH Search)
The TV will automatically set the channels it can
receive in your area.
Setting channels one at a time
(CH Memory)
This method is for manually setting the channels
you want one by one. Use this method if you want
to add other channels after using "CH Search".

Setting TV channels

Selecting broadcast (Air) or cable TV
(Cable) for channel setting
It is necessary to set the receiving mode to "Air" or
"Cable" channels to receive locally broadcast TV
programs.
1. Press the TV button to select TV mode.
2. Press the MENU button to display the MENU
3. Press the
4. Press the
5. Press the
6. Press the
E32
TV
MENU
ENTER
CH
A channel number will appear in the upper-right
corner of the screen.
screen.
buttons to select "Setup".
MENU [Setup]
Picture Audio Setup
CH Setup
V-Chip
Position
Language
buttons to select "CH Setup", and
press the ENTER button.
"CH Setup" screen will be displayed.
[Setup ... CH Setup]
MENU
Air/Cable
Selecting Air/Cable channels
CH Search
CH Memory
Cable(STD)
Cable(HRC)
Cable(IRC)
buttons to select "Air/Cable", and
press the ENTER button.
buttons to select the desired
mode, and press the ENTER button.
Continue to Saving broadcast TV channels in
the memory (CH Search) or Setting channels
manually (CH Memory) on page E33.
AV
PC
VOL
Option
[English]
Air