Search For Errors - VINCENT DAC-700 Instructions For Use Manual

Symptom
Unit does not work
after pressing the
power button
No sound on both
channels although
the unit is ready for
use (one of the LEDs
for the input selection
is lit).
No audio playback
on one channel

SEARCH FOR ERRORS

Possible Cause
Mains cable is not connected to a suitable
mains wall outlet.
Mains cable has not been firmly inserted into
wall power socket and the device's socket.
Otherwise it may be defective.
Unit fuse or unit is defective.
The currently selected audio source (3)(18) is
giving no signal.
The output of the source device is not connec-
ted or is wrongly connected e.g. not connec-
ted to the selected input channel terminal of
the preamplifier.
The DAC is muted (MUTE function).
The used data format can not be played or is
damaged.
The source equipment is giving signal on only
one channel.
One of the signal cables between audio sour-
ce and DAC inputs has not yet been plugged
in or is defective.
Countermeasure
Connect to a functioning socket using a suit-
able mains voltage.
Check the power cable. If necessary,
exchange it with a suitable mains cable and
push its plug firmly into wall socket and the
device's power connector.
Contact your dealer.
Switch on the source unit and begin playback.
Correct the connection.
Deactivate mute function ("MUTE" button (17)).
Please check the data you want to play if it is
compatible with the device.
Check the audio source.
Check the cable connections, tighten them if
necessary.
Vincent
39