Table of Contents
Advertisement
Timer Setting
ON Timer
Automatically turns power ON after the set length of time has passed.
14
Web-site: www.sharp.co.uk/support
1
Press
to call the MAIN menu
screen
Press
or
2
and press
.
Press
or
3
mode.
Press
or
to set the time. (from 10
4
min. to 12 hour 50 min., in 10 min. incre-
ments)
5
Press
to put the TV set into
Standby mode. Power indicator flashes
red.
When the preset period of time (in the
above example, 8 hours and 30 minutes)
has passed, the power turns ON and a
picture appears on the screen.
NOTE
•
In order to know when the ON Timer programme has been run properly, when the
TV is in the standby mode, the ON Timer indicator remains flashing in red.
•
As a safety precaution, in case nobody is at home when the television switches on
automatically, the television set will turn itself of automatically after 120 minutes; if it
is to continue to run, any button of the remote control functions should be pressed.
•
In the event of a power cut, disconnection from the plug, or the television is
switched off at the mains switch, all the data on the ON Timer will be cancelled.
to select "TIMER",
to select "
ON"
Help Line (office hours only): 0990-274277
EXIT
PICTURE
TIMER
LOCK
TUNING
ON
00:00
OFF
00:00
ON
08:30
OFF
00:00
Advertisement
Table of Contents
