Remington TITANIUM POWER PR1347AU Use & Care Manual page 6

Wet/dry shaver
Table of Contents

Advertisement

CLEANING
DAILY
1. Open the shaver head by pressing the release button on the front of the shaver (Fig. A) and
flipping open the head away from the body of the shaver (Fig. B).
2. Tap out excess hair shavings.
3. Rinse the head of the shaver in running water.
4. Close the head assembly.
MONTHLY
• Perform cleaning steps 1 and 2.
• Hold the shaver upside down so that the open cutter assembly is facing towards you. Slide
the blue cutter support frame upwards towards the shaver to release it from the assembly
8
Place the trimmer at desired trim line for a quick, easy, professional trim.
(Fig. C).
9
To retract the trimmer, push down until it locks into position.
• Pull the cutter support frame away from the inner cutters (Fig. D).
• Thoroughly brush hairs from the inner and outer cutters. Rinse out remaining debris (Fig. E).
Tips for best results
E
• Place the cutter support frame back into position and lock into place (Fig. F-G).
Ensure your skin is dry. Always hold the shaver at right angles to the skin so
that all three heads are touching the skin with equal pressure.
• Align the spring hinge into the slot at the back
Use moderate to slow stroking movements. The use of short circular
WARNING
motions in stubborn areas may obtain a closer shave, especially along the
• Detach the hand-held part from the supply cord before cleaning in water.
neck and chin line.
• Shaver heads are suitable for cleaning under an open water tap.
DO NOT press hard against the skin in order to avoid damage to the rotary
heads.
CAUTION
• Shaver heads can be rinsed with water. The water temperature should not exceed 70
C CARE FOR YOUR SHAVER
degrees. Unplug the shaver before cleaning with water.
• Keep the adaptor and cable dry.
Care for your appliance to ensure a long lasting performance. We recommend
TRIMMER
you clean your product after each use. The easiest and most hygienic way to
• Lubricate the teeth of the trimmer every six months with a drop of sewing machine oil.
clean the appliance is by rinsing the appliance head after use with warm water.
A
E
I
B
F
J
6
K
D
H

Advertisement

Table of Contents
loading

Table of Contents