Configuration Of The Sero; Using The Tv Controller - Samsung Sero QA43LS05TAJ User Manual

06 Configuration of The Sero

Using the TV Controller

Using the TV Controller button at the top on the rear panel, you can turn on The Sero. If the button is pressed
again with the power on, you can see the function menus on the screen. The usage of the menus is shown in the
following figure.
<Portrait Mode>
• The product colour and shape may vary depending on the model.
• Remove the protective film attached on the Samsung logo. The reception sensitivity may decrease when
the sensor is blocked.
Setting the sound sensor
You can turn on or off the sound sensor by using its button at the bottom of the TV.
With the TV on, you can push the button backward to turn on the sound sensor or forward to turn off it.
See the pop-up window on the TV to check whether the sound sensor is turned on or off.
• The position and shape of the sound sensor may differ depending on the model.
• During analysis using data from the sound sensor, the data is not saved.
English - 18
TV Controller button
Press: Move
Press & Hold: Select
The TV Controller button of the product is located at the top of the
rear panel.
Control menu
: Power off : Channel Up
: Volume Up : Channel Down
: Volume Down : Source
: Rotate
Remote control sensor / Eco sensor /
Sound sensor
<Landscape mode>