Page 1
O P E R AT I O N M A N UA L Please read this operation manual carefully before using the colour television. If you require any advice or assistance regarding your Sharp product please visit our web-site www.sharp.co.uk/support. Customers without Internet access may telephone 0990 274277 during office hour.
0990-274277 5. The cost of carriage to and from the Dealer, Supplier or Sharp approved Service Facility shall be borne by the purchaser. 6. No person has any authority to vary the terms or conditions of this guarantee.
Use only with a cart or stand recommended by the manufacturer, or sold with the television equipment. Never insert or drop any metallic or inflammable objects into the ventilation holes of the TV set, this can cause fire, electrical shock or electrical failure. Do not place a flower vase or anything else containing liquid on the TV set, as liquid spilt on the TV set can cause serious problems.
Location of controls ...5 Dear SHARP Customers Congratulations! You are now the proud owner of a SHARP Colour Television Receiver. To ensure proper operation, please read this manual carefully. After reading, keep this manual in a safe place for future reference.
Scart-terminal Aerial terminal Typical connections Enjoy the stunning visuals of a VCR by connecting them to this TV set through its Euro-SCART 21-pin terminal. Please refer to the operation manual of your VCR for details. Typical connection (VCR and TV)
RESET (h) button (Teletext) TV Front Earphone Jack 3.5 mm ø jack plug Earphone impedance 16 ~ 600 ohm Remote control sensor Web-site: www.sharp.co.uk/support page page CHANNEL UP ( VOLUME UP ( Help Line (office hours only): 0990-274277 Infrared Transmitter Window...
Channel Setting This facility will automatically tune all local TV station for you. The following steps are carried out using the remote control. Auto Tuning Automatically tunes in and presets receivable TV stations. Web-site: www.sharp.co.uk/support Press to call the MAIN menu...
Channel Setting (Continued) This section describes how to tune your TV manually and to store them in the order you prefer. The following steps are carried out using the remote control. Manual Tuning Setting a TV station to a desired Programm position Web-site: www.sharp.co.uk/support...
Page 10
Channel Setting (Continued) Web-site: www.sharp.co.uk/support Press to start preset. The tuning sequence will stop when a signal is detected, if the signal is not the required channel press continue. Press to select “MEMO”, and press to memorize. Repeat steps 4 to 7 if you wish to preset other channels.
Channel Setting (Continued) Fine Tuning This function lets you easily fine-tune the TV set to improve reception and picture quality. Web-site: www.sharp.co.uk/support Press to call the MAIN menu screen Press to select “TUNING”, and press Press to select “MANUAL”, and press Press to select “FINE”, and...
Channel Setting (Continued) Skipping Programmes This function lets you skip vacant channels or channels that you never watch when you select channels with Setting Skip Web-site: www.sharp.co.uk/support Press to call the MAIN menu screen Press to select “TUNING”, and press Press to select “MANUAL”,...
Channel Setting (Continued) Cancelling Skip Web-site: www.sharp.co.uk/support Press to call the MAIN menu screen Press to select “TUNING”, and press Press to select “MANUAL”, and press Press to select “FINE”, and press Press to select «PR» Select programme number for which you...
) button · Web-site: www.sharp.co.uk/support Preparation Turning on the power on the TV set. ¨ Press If a picture appears on the screen, go to step 2. If a picture does not appear on the screen, go to step 1.
Picture Adjustment Adjusting the Picture Picture quality (CONTRAST, COLOUR, BRIGHTNESS, SHARPNESS) are adjustable in this menu. Web-site: www.sharp.co.uk/support Press to call the MAIN menu screen Press to select “PICTURE”, and press Press to select the items to adjust. Selected item...
In order to know when the ON Timer programme has been run properly, when the TV is in the standby mode, the ON Timer indicator remains flashing in red. As a safety precaution, in case nobody is at home when the television switches on automatically, the television set will turn itself of automatically after 120 minutes;...
Page 17
When you have finished setting the time, press When the preset period off time (in the above example, 1 hour and 30 minutes) has passed, the TV set turns to Stand-by mode. Help Line (office hours only): 0990-274277 EXIT PICTURE...
Child Lock (Channel Block) You can lock a TV Programm position to prevent unsupervised TV viewing by following these procedures: Setting Child Lock NOTE You can also protect the SCART connection. • • • Web-site: www.sharp.co.uk/support Press to call the MAIN menu...
Page 19
Child Lock (Continued) Cancelling Child Lock Web-site: www.sharp.co.uk/support Press to select except for locked programme. Press to call the MAIN menu screen. Press to select “LOCK”, and press Press to select the programme position you wish to cancel. Press to select “FREE”, and press .
If, after switching from programme 5 to programme 7, programme will change to programme 5. Press programme 7. Sound Mute Silences the sound. Web-site: www.sharp.co.uk/support is pressed, the again to return to Press The symbol “c” appears on the screen, and the sound is silenced. Press again.
Other functions (Continued) TV/VIDEO Switches between TV broadcasts and AV input programmes. Each time you press toggles between SCART and TV programmes. Call Displays the current programme number, the timer and other settings on the screen. Web-site: www.sharp.co.uk/support , the input...
To switch ON, select a page number and switch OFF the Teletext Fast Page Selection Select a TV channel, which is broadcasting the Teletext programme you would like to watch. Press the TEXT/MIX/PICTURE button a/b/Q to select the TELETEXT mode.
Page 23
NOTE: You can use this button together with the CANCEL button k. This means that you can view the main TV picture until the subpage has been found. The on screen icon a at the top left side of the screen will change when the subpage has been found.
Page 24
How to Operate Page Memory Your TV has 32 Teletext page number memories for fast recall of Teletext information. In programme positions 0 through 6, four Teletext page numbers can be stored in each position; a total of 28 pages.
This unit is equipped with a microprocessor. Its performance could be adversely affected by external electrical noise or interference. If this should happen, unplug the unit and plug it in again after a few minutes. Web-site: www.sharp.co.uk/support Help Line (office hours only): 0990-274277...
If the problem cannot be corrected by the use of this guide, remove the mains plug from the wall socket, and contact the Dealer or Supplier from whom the unit was purchased in order to obtain service. Where this is not possible, please visit our web-site www.sharp.co.uk/support. Customers without Internet access may telephone...
Page 28
Œ Œ SHARP ELECTRONICA ESPAÑA, S.A. SHARP ELECTRONICS (U.K.) LTD. Sharp House, Thorp Road, Newton Health, Manchester M40 5BE PRINTED IN SPAIN TINS-6869BMN0 8/00...