Sharp AL-1530CS Online Manual page 15

3
Scanning an Image from a TWAIN-Compliant Application (part 2)
4
Select "Acquire Image" from the "File" menu, or
click the "Acquire" button (
The scanner driver setup screen will appear.
Reference: Scanner Driver Settings
5
In the "Scanning Position" menu, select the
position in which you placed the original in Step 1
("Platen" or "SPF").
Select "SPF" when you placed the original in the SPF/RSPF.
6
Click the "Preview" button.
The preview image will appear.
! If the rotation or angle of the image is different, reset
the original, and click the "Preview" button again.
! If you set multiple pages in the SPF/RSPF, the
Note
unit previews only the page placed on the top of
the originals, and then sends it to the original
exit area. Return the previewed page to the
SPF/RSPF before starting the scanning job.
).
Reference:
7
Specify the scanning area, and set the scan
preferences.
For information on specifying the scan area and setting
the scan preferences, see scanner driver Help.
Scanner Driver Settings
Setting a large area with full color together with a
high resolution setting, makes the data size large,
resulting in extended scanning times. It is
Caution
recommended to set the scanning preferences
depending on the type of the original to be
scanned, i.e., Text, Text/Graphics, Photograph,
Color, Black & White.
8
Click the "Scan" button after setting your preferences.
To cancel your scanning job after clicking the "Scan"
button, press the [Esc] key on your keyboard.
When you close the scanner driver after scanning, the
image data will appear as a new file in Sharpdesk.
CONTENTS
13
INDEX