Page 1
NA605BT INSTALLATION/OWNER'S MANUAL Media Receiver Built-in Full Range Digital Amplifier Inputs...
Page 2
NA605BT Preparation Please read entire manual before installation. Before You Start • Disconnect negative battery terminal. Consult a qualified technician for instructions. • Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration.
(Violet/Black) (Violet) (White) (White/Black) (Gray/Black) (Gray) ANTØ3(BLACK) FUSE When replacing the fuse, make sure new fuse is the correct type and amperage. Using an incorrect fuse could damage the radio. The NA605BT uses one 30 amp ATM fuse located in-line.
NA605BT Control Locations - Receiver Open Tune / Track Down Source Preset Down / Thumbs Down Camera / Loudness Display Mute Play / Pause Band / Go Back Volume Knob/ Select (push) Power Preset Up / Thumbs Up Menu Tune / Track Up...
NA605BT Control Locations - Remote 15 5 Source Preset Up / Thumbs Up Volume Up Preset Down / Thumbs Down Power Key 5 / Folder Down Select Key 4 / Play / Pause Tune / Track Up Key 1 / Repeat...
Auxiliary Input, USB, iPod, Bluetooth and Pandora modes. Modes of operation are shown in the display. Auxiliary Input The NA605BT uses the IP35USB adapter on the back of the unit for connecting an audio device, MP3 player, etc. Refer to the wiring diagram for connection instructions. Once connected, press SOURCE to select auxiliary input mode.
Page 7
NA605BT General Operation Setup Menu Press MENU to toggle through and select one of the following setup menus: Audio, General, Gain and Radio. 1. Once the desired menu is displayed, rotate the volume knob to scroll through the list of menu features.
NA605BT General Operation General Setup Menu Menu Function Options Action Rotate the volume knob to adjust the hours, then press Set the Clock Clock SELECT to confirm. Repeat to adjust the minutes, and repeat again to adjust AM/PM setting. Programs the unit to display 12-hour AM/PM time (example:...
Page 9
NA605BT General Operation Gain Setup Menu Menu Function Options Rotate the volume knob to adjust the tuner gain. Tuner Gain (-6 minimum / +6 maximum) Rotate the volume knob to adjust the gain for the front auxiliary input. Aux Gain (-6 minimum / +6 maximum) Rotate the volume knob to adjust the gain for the rear auxiliary input.
NA605BT AM/FM Tuner Operation Press TUNE or TUNE momentarily to change Manual Tuning radio frequency up or down one step at a time. Press and hold to advance quickly. Seek Tuning Press TUNE or TUNE for more than two seconds (then release) to automatically seek and tune to the next strong station.
NA605BT MP3/WMA Operation Playing MP3/WMA Files To play MP3/WMA files, connect a USB device containing MP3/WMA files. “Loading" will flash in the display. Depending on the number of files and folders, this may take several seconds. Displaying Information Press DISP to cycle between track information and file/ folder information.
Page 12
NA605BT MP3/WMA Operation File/Folder Search Begin Searching Press SELECT to enter the file/folder search mode. A list of all the folders from the device will be displayed. Note: Any files located in the root directory will be located in the folder named "ROOT".
Page 13
NA605BT MP3/WMA Operation File/Folder Compatibility and Support Type Specification • MP3 data (.mp3) Compatible File Types • WMA data (.wma) • DRM protected files • WMA lossless • Apple lossless Incompatible File • WMA Pro Types • MP3 Pro • MP3 playlists •...
Podcasts Full/Manual Control The NA605BT features both full and manual control modes for iPod/iPhone devices. See page 8 for details to toggle the control between full and manual modes. Important: To support manual control for iPod/iPhone, the iPod device must be updated to the newest firmware.
Page 15
NA605BT iPod Operation Song Select Press to skip to the beginning of next song. Press to return to the beginning of current song. Pressing again skips to the beginning of previous song. Fast Forward and Press and hold to fast forward or reverse a Reverse song.
Connecting a Paired Device Most Bluetooth devices support the auto-connect feature, and will connect automatically if the device is in range when the NA605BT is powered-on. If your device was previously paired but does not connect, use these instructions below.
2) Press and hold MENU for 3 seconds to reset Bluetooth settings back to factory default. Compatibility Note: Due to the differences in Bluetooth technology, some mobile devices may be incompatible, function improperly or may not support all features when used with the NA605BT. Bluetooth Setup Menu Options Function...
NA605BT Pandora Operation Requirements Control for Pandora requires: • An iPhone device with a reliable data connection, or an iPod touch that is connected to wireless internet. • The Pandora App installed on the iPhone/iPod device. • An active account with Pandora. Sign up at www.pandora.
NA605BT Troubleshooting Problem Cause Action Yellow wire not connected or incorrect Check connections for proper voltage Red wire not connected or Unit will not turn on voltage (11-16VDC) incorrect voltage (no power) Black wire not connected Check connection to ground...
NA605BT FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the NA605BT and is the answer not in the manual?
Questions and answers