Table of Contents
Advertisement
Pay attention to moving branches or other forces that could close a notch and pinch or hinder the
-
chain.
-
Do not attempt to cut a branch with a diameter greater than the cutting length of the chain saw.
-
Always switch off the tool, let the chain stop and remove the battery before making any
adjustments, maintenance or repairs. Always remove the battery always install the blade guard to
store the tool or transport it.
-
The chain must remain sharp and taut. Regularly check the tension of the chain.
-
Only use replacement parts and original accessories.
-
Use only the manufacturers specified replacement guides and chains. Incorrect replacement
guides and chains may cause chain breakage and / or rebound.
-
Remove the battery before servicing, cleaning or cleaning the appliance.
-
Always hold the appliance firmly with both hands.
Check that there are no obstacles or electrical wires hidden in the work area.
-
-
Check the general condition of the appliance before each use. Do not use a device with a
damaged battery or other parts. Do not touch a damaged cable. In case of any damage, have the
appliance repaired by an authorized repairer.
-
Immediately stop the device if an abnormal level of vibration has been detected. In case of
damage to the blade, it is necessary to change the complete set of blades.
-
Use the device only if all protective devices are mounted. Do not use the device with faulty
protective equipment. Do not modify the unit.
Keep the cable away from the work area.
-
-
Do not work with the tool when it rains, in bad weather or in a damp environment. Do not use the
machine when there is a risk of thunderstorms and storms.
-
Only work outdoors, under daylight or under artificial lighting.
-
Always carry the appliance by its handle
-
Tie long hair in a way to prevent them from coming into contact with the blades. Do not wear
jewelry and loose clothing when operating the machine.
-
The appliance should never be used near people, especially children and pets. Stop the
operation immediately if this condition is not met. In all cases, ensure a safe area of at least
15 meters around the work area.
The operator is responsible for accidents caused to others.
-
-
Always take a stable working position. Make sure you step on the slopes. Take extreme caution
when working on slopes.
-
Do not use the tool when you are tired, sick or under the influence of alcohol or drugs.
-
Take regular breaks to reduce the risk of fatigue.
-
Never leave the machine unattended. Switch off and remove the battery and put it out of the
reach of people if you are away from work.
Remove the battery when transporting it. Put the guard on the blade when it is being transported.
-
-
This device is not intended for use by persons (including children) whose physical, sensory or
mental capacities are reduced, or by persons without experience or knowledge, unless they have
been able to benefit, By means of a person responsible for their safety, supervision or prior
instructions concerning the use of the appliance. Children should be supervised to ensure that
they do not play with the appliance
-
Always keep this manual at hand.
-
The device must always be used fully assembled and secured.
-
Store the tool with its blade guard and out of the reach of children
-
Never use an incomplete or unauthorized tool.
Local laws may restrict the use of this tool.
-
-
Check the tool regularly and before each use to observe any impact or damage.
-
Always use the tool with the supplied harness.
Advertisement
Table of Contents
