Advertisement
Quick Links
Thermostat & manual gas
griddles
INSTALLATION & OPERATION MANUAL
Models: IRMG-24, IRMG-36, IRMG-48, IRTG-24,
IRTG-36, IRTG-48
This manual contains important information regarding your IRON RANGE Griddle.
Please read the manual thoroughly prior to equipment set-up, and operation
maintenance. Failure to comply with regular maintenance guidelines outlined in the
manual may void the warranty. Improper installation, adjustment, alteration, service
or maintenance can cause property damage, injury or death. Read this manual
thoroughly before installing or servicing this equipment.
MUST READ!
1
Owner's/Installer Manual Rev IR20191217
For Warranty Service Call 866-359-7378
Advertisement
Summary of Contents for IRON IRMG-24
- Page 1 INSTALLATION & OPERATION MANUAL Models: IRMG-24, IRMG-36, IRMG-48, IRTG-24, IRTG-36, IRTG-48 This manual contains important information regarding your IRON RANGE Griddle. Please read the manual thoroughly prior to equipment set-up, and operation maintenance. Failure to comply with regular maintenance guidelines outlined in the manual may void the warranty.
- Page 2 IRON RANGE Griddles are intended for commercial use only. Not for household use. Warranty will be void if service work is performed by other than an authorized technician, or if other than genuine IRON RANGE replacement parts are installed. Be sure this Operator’s/Installer’s Manual and important papers are given to the proper authority to retain for future reference.
-
Page 3: Table Of Contents
Congratulations! You have purchased one of the finest pieces of commercial cooking equipment on the market. You will find that your new equipment, like all IRON RANGE equipment, has been designed and manufactured to meet the toughest standards in the industry. Each piece of IRON RANGE equipment is carefully engineered, and designs are verified through laboratory tests and field installations. -
Page 4: Specifications
Contact your local representative or IRON RANGE first. 2. Select a location for the Griddle that has a level, solid, nonskid surface that is nonflammable and away from water hazards or sinks and is in a well-lighted work area away from children and customers. - Page 5 11. Pipe threading compound must be resistant to the action of liquefied petroleum gas. DO NOT USE TEFLON TAPE. DO NOT use an open flame to check for leaks. Check all gas piping for leaks with a soap and water solution before operating the unit. The installation of this appliance must conform to local codes, or in the absence of local codes, the National Fuel Gas Code, ANSI Z223.1/NFPA 54, or the Natural Gas and Propane Installation Code, CSA B149.1, as applicable.
- Page 6 Maintenance: A qualified service company should check the unit for safe and efficient operation on an annual basis. Contact the factory representative or local service company to perform maintenance and repairs. Gas Piping: Gas piping shall be of such size and so installed as to provide a sufficient supply of gas to meet the full gas input of the appliance.
-
Page 7: Cleaning
COMMISSIONING: Commission of your new Griddle is of the utmost importance. Commissioning is the thorough and methodical testing of the equipment, subsystems, and systems to ensure that the final product Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. - Page 8 • Never use the Griddle as a heating source. • The Griddle does not contain any user-serviceable parts. Only qualified technicians should carry out repairs. Do not remove any components or service panels on this product. • Never bypass, alter, modify, or attach any unauthorized parts to this equipment. Doing so may create a hazard and will void warranty.
- Page 9 It is also necessary that sufficient air should be allowed to enter the room to compensate for the amount of air removed by any ventilation system. Otherwise, a subnormal atmospheric pressure will occur, affecting operation and causing undesirable working conditions. A properly designed and installed hood will act as the heart of the ventilation system for the room or area in which the unit is installed and will leave the unit independent of changing draft conditions.
- Page 10 CLEANING INSTRUCTIONS • DO NOT use any abrasive or flammable cleaning fluids. • DO NOT hose down, immerse, or pressure wash any part of the Griddle, excluding the catch tray. • NEVER use a scrubber pad (on all exterior surfaces, except the griddle plate), steel wool or abrasive material, or cleaners containing chlorine, iodine and ammonia, or bromine chemicals as these will deteriorate the stainless steel and shorten the life of the unit.
-
Page 11: Service/Trouble Shooting
CAUTION: If the catch tray is permitted to fill too high, grease/debris is likely to accumulate under the unit. This catch tray/drawer is removed by pulling forward. USE CAUTION WHEN REMOVING! TROUBLESHOOTING Problem Possible Cause Solution Main gas line is closed. Open Valve Quick disconnect not inserted all Check quick disconnect and... -
Page 12: Parts
NOTICE: INSTALLATION OF OTHER THAN GENUINE IRON RANGE PARTS WILL VOID THE WARRANTY ON THIS EQUIPMENT. The serial plate is located on the side. Replacement parts may be ordered either through an IRON RANGE Authorized Parts Distributor or an IRON RANGE Authorized Service Agency When ordering parts, please supply the Model Number, Serial Number, Part Number, and Description. - Page 13 GC10007 DRIP PAN GC10014 FRONT PANEL GC10003.1 PILOT TUBING GC10015 PRESSURE REGULATOR *Griddle Thermostat and Dial are not shown. PAGE LEFT BLANK INTENTIONALLY Owner’s/Installer Manual Rev IR20191217 For Warranty Service Call 866-359-7378...
- Page 14 PAGE LEFT BLANK INTENTIONALLY Owner’s/Installer Manual Rev IR20191217 For Warranty Service Call 866-359-7378...
- Page 15 We all recognize, however, that replacement parts and occasional professional service may be necessary to extend the useful life of this unit. When service is needed, contact an IRON RANGE Authorized Service Agency, or your dealer. To avoid confusion, always refer to the Model Number, Serial Number and the Type of Gas (Nat or LP).
Need help?
Do you have a question about the IRMG-24 and is the answer not in the manual?
Questions and answers