AIRLIFT OFF65991 Quick Reference Manual

airLIFT Electric Tempered Glass Height Adjustable Desk
(Model No. OFF65991, OFF65992)

Power ON the Desk:

When you plug in the desk, you
will hear a beep. The controller
will then show the current height
of the desk. If the number
indicated on the display is
different from the actual height,
you will need to reset it.

How to Reset

Press and hold the
If the display shows "rst", press and hold the
you hear a "beep-beep" sound.

How to Adjust the Height

Press and HOLD either the

How to Save the Height in Memory

There are 3 available memory heights you can save - 1, 2 & 3. Adjust the desk to your desired
height and press the "M" button to display "S-". Then press any of one the 1, 2 or 3 number
button. When a memory is saved, you will hear "beep-beep" sound.
By repeating the same steps, you can save or override an old saved memory with a new height.

How to Lock/Unlock the Controller

First adjust the desk height to your desired lock height. Then press and HOLD the
buttons together for about 5 seconds until "Loc" is displayed.
At this moment, the Controller is locked and the desk height can't be adjusted.
In order to unlock, press and HOLD the
number (previously locked height) is displayed.

Power Save Mode

If there is no action for 1 minute, the desk will enter the power-saving mode. The display on the
Controller will be turned off. Press any button on the Controller to wake the desk from "Power
Save Mode".
Please see reversed side for the complete list of error codes and troubleshooting steps
Quick Reference Guide
MEMORY
1/2/3
button until you hear a "beep-beep" sound
or to adjust to your desired height of the desk.
and
for this desk.
LED
SAVE
DISPLAY
MEMORY
button again until it shows a number and
buttons together for about 5 seconds until a
UP/DOWN
ARROW
and