Table of Contents
Advertisement
LCD TV Service Manual
During updating, if you find the follows :
DebugOn: Command Successful.
SetBuffer: Command Successful.
Delay: Command Successful.
Reset: Command Successful.
RAMWrite: Command Successful.
Run: Command Successful.
Delay: Command Successful.
Erasing FLASH... Done.
Delay: Command Successful.
Writing FLASH...
- Start address: 0x00018000
- Buffer size: 532816 ( 0x00082150 ) Bytes
- Minimal address space required: 20 bits
Please waiting, the process will spend more than 50s
If you find:
Timeout while waiting for response. Check connections and reset board.(Error
Code:00000002)
Error executing batch file at line 1.
Execution time: 1.15s
Please check the Gprobe settings, and whether the serial line is linked correctly,
- 20 -
Advertisement
Table of Contents
