Indicator
Name
Malfunction
Indicator Lamp
Charging System
Indicator
Shift Position
Indicator
*
M (7-speed
manual shift mode)
Indicator/Shift
Indicator
*
* Not available on all models
On/Blinking
●
After you have set the power mode to ON,
the vehicle performs system checks.
However, if the readiness codes have not
been set by that time, this indicator will
blink five times and then go off.
Comes on if there is a problem with the
●
emissions control systems.
●
Blinks when a misfire in the engine's
cylinders is detected.
Comes on when there is a problem with
●
the charging system.
Indicates the current shift position.
●
Comes on when the 7-speed manual shift
●
mode is applied.
Explanation
●
Readiness codes are part of the on-board
diagnostics for the emissions control systems.
2 Testing of Readiness Codes P. 820
2 If the Malfunction Indicator Lamp Comes On
or Blinks P. 796
Stop in a safe place and contact a dealer
●
immediately.
2 Checking the Battery P. 747
2 If the Charging System Indicator Comes On
P. 796
2 Shifting P. 503, 505
2 7-Speed Manual Shift Mode P. 507
uuIndicatorsu
Continued
101