Remote Control; Shortcut Function - Danby DPA140HBACBDB Owner's Manual

OPERATING INSTRUCTIONS

REMOTE CONTROL

1. Power Button: Press to turn the unit on or off.
2. Mode Button: Press to select the desired mode.
3. Fan Button: Press to select fan speed.
4. Ionizer Button: Press to activate the ionizer
function.
5. Sleep/Filter Button:
• Press to start the Sleep function.
• The fi lter light will illuminate after 250 hours of
use as a reminder to clean the fi lter; to reset the
fi lter after cleaning, hold the Sleep button for 3
seconds.
6. Swing Button: Press to start the auto swing
feature. When auto swing is activated, press
again to stop the louver at the desired angle.
7. Follow Me Button: Press to activate the Follow
Me function.
8. LED Button: Press to turn the LED display on or
off.
9. Timer Off Button: Press to set the Auto-off timer.
10. Timer On Button: Press to set the Auto-on timer.
11. Shortcut Button: Press to set and activate the
short cut function.
12. Up and Down Buttons:
• Used to set the temperature and timer.
• Press and hold both Up and Down buttons for 3
seconds to change the temperature display from
°C to °F.
13. LED Display:
• Shows the set temperature in °C or °F or the
auto-timer settings.
• While on Dry mode shows the relative humidity.
• When on Fan mode shows the room
temperature.
1
2
3
4
5 6 7 8

Shortcut function

• Used to save a favourite setting.
• Set the appliance to the temperature and fan
speed that you would like to set as a favourite.
• Press and hold the Shortcut button for 2 seconds.
• Press the Shortcut button at any point in future to
return to the favourite setting.
• If no favourite is set, pressing the Shortcut button
will cause the appliance to run in Auto mode at
29°C (79°F), with fan speed set to Auto.
9
13
11
12
10
9
(only available on remote):