Advertisement
Please follow the guidelines below to ensure best performance:
AMPLIFIER SETTINGS
Please follow the 300 / 500 W (depicted below) amplifier settings below:
• Level Control: Generally 10 - 11 o'clock not higher
• Frequency or Low Pass Control: 9 – 10 o'clock
• Low Pass – 9 - 10 o'clock
• Phase: 0 -180 deg – adjust for max output
A
• A: Volume – Controls subwoofer level.
level @ 10 - 11 o'clock or lower. Using at settings greater than 12 o'clock could
cause failure.
• B: Low Pass – Controls the amount of mid-bass. Normal setting is about half-way up
• C: Phase – Variable from "0" to "180". Slowly turn until you hear optimal bass
response
• D: Phono Inputs ("Line-in") – Feed signal to the subwoofer from the receiver
connected directly to the "Sub Out" on the receiver
• E: Speaker Level Inputs
C
B
This amplifier has a very high gain. Set the
D
E
Advertisement
