Pairing - Corega BTSHS01 User Manual

(2) Pairing

a. Press and hold the pairing/track wheel button on the stereo head-
set until blue and red LEDs are flashing.
b.To properly perform pairing procedure on your mobile phone,
please refer to the manual of your mobile phone for its own pairing
instruction.This device name is set to be [CG-BTSHS01]. If you are
asked to enter pin-code during pairing, please enter [1234].
*Note:
1. If the pairing is unsuccessful, the BLUE LED is then flashing.
Please repeat the step a and b until the pairing is completed.
2. One headset can only be paired with one bluetooth mobile
phone each time.
3. If the headset is switch off and switch back on again, there is no
need to repairing. Please press once on the round control but-
ton of headset or reconnect bluetooth connection from mobile
phone to back on bluetooth connection status.
BTSHS01 User Manual
11