Important Information Please read all instructions carefully before using. • Please retain these instructions for future reference, as they contain important information. • All cleaning should be carried out by an adult. • Products liable to be cleaned with liquids are to be disconnected from the transformer before cleaning.
Fitting & Replacing Batteries 1. Remove the back cover of the Ultimate Timers with a screwdriver. 2. Remove the exhausted batteries, and dispose of responsibly. 3. Fit the new battery pack according to the battery labelling inside the battery compartment. 4.
Using your Ultimate Timers Your Ultimate Timers are a 40 Lap Memory Stopwatch, with the functionality to be able to review the 40 laps saved in the memory. Timing an Event Press the start/stop button to begin timing an event. Press the start/stop button a second time to stop timing.
Page 5
The Ultimate Timer will enter low power mode if it is left in the stop mode for more than 10 minutes or left timing for more than 24 hours. The Ultimate Timer will also enter low power mode if it is placed in the docking station without the external charger connected.
Page 6
International Charging Adaptor The Ultimate Timers are supplied with a multi-region adaptor. The adaptor is supplied with the UK plug fitted but you can change this easily to suit any country. Press the release button behind the plug head and slide the UK plug out and replace with the required plug module. Slide the plug module in until it “clicks”...
Mistreating the Ultimate Timers or opening the plastics module for reasons other than to replace the batteries will invalidate this warranty. Made in China, on behalf of the TTS Group LTD. Technical Support Please visit www.tts-group.co.uk for the latest product information.