Sea & Sea DX-1G Supplementary Manual

Language setup instructions

Hide thumbs Also See for DX-1G:

DX-1G Camera Language Setup Instructions

You will need the following items to proceed:

DX-1G Camera

Fully charged Battery

1. Remove DX-1G Lens Cap

2. Set Camera MODE to Auto (Green Camera Icon)

3. Turn Power On

4. Set Date and Time, if prompted

5. Press MENU button one time

6. Press RIGHT Arrow button one time to enter SETUP

7. Scroll down to setup screen #5 by pressing DOWN Arrow button approximately 25

times until LANGUAGE function is highlighted

8. Press RIGHT Arrow button one time

9. Press DOWN Arrow button one time to select ENGLISH

10. Depress the "OK/Menu" Button to lock in setting

11. Proceed with normal use

Table of Contents

Do you have a question about the DX-1G and is the answer not in the manual?