Cleaning The Adhesive Gel Pad; Cleaning Other Parts Of The Style Cover Window - Sony SCR30 User Manual

Cleaning the adhesive gel pad

If the adhesive gel pad loses its adhesive properties, you can clean it.
To clean the adhesive gel pad
1 Detach your phone from the Style Cover Window.
2 Gently rub a slightly damp cloth over the gel so that dust and other small
particles get removed.
3 After the gel pad dries, re-attach your phone.

Cleaning other parts of the Style Cover Window

If parts of the accessory other than the gel pad get dirty, you can clean them with a
soft, dry cloth.
To clean parts of the accessory other than the gel pad
1 Detach your phone gently from the Style Cover Window accessory.
2 Gently rub a soft dry cloth on the surface of the accessory so that sand, dust
and any other small particles get removed.
3 After the surface of the accessory is clean, re-attach your phone.
In order to avoid colour fading, do not use alcohol, thinner, benzene or detergent when
cleaning the accessory.
Avoid exposing the accessory to sandy environments. If sand gets attached to the inside of
the front cover, your screen may get scratched.
This is an Internet version of this publication. © Print only for private use.
9