Important
When selecting the Administrator / User Password items, a password box will appear
on the screen. Type the password then press <Enter>. The password typed now will
replace any previous set password from CMOS memory. You will be prompted to
confirm the password. You may also press <Esc> to abort the selection.
To clear a set password, press <Enter> when you are prompted to enter a new
password. A message will confirm the password is being disabled. Once the password
is disabled, you can enter the setup and OS without authorization.
Trusted Computing
f
Sets TPM (Trusted Platform Module) function.
fSecurity Device Support [Disabled]
Enables or disables the TPM function to build the endorsement key for accessing
the system.
Chassis Intrusion Configuration
f
Press <Enter> to enter the sub-menu.
fChassis Intrusion [Disabled]
Enables or disables recording messages when the chassis is opened. This function
is ready for the chassis equips a chassis intrusion switch.
[Enabled]
Once the chassis is opened, the system will record and issue a
warning message.
[Reset]
Clear the warning message. After clearing the message, please
return to Enabled or Disabled.
[Disabled]
Disables this funcion.
Save & Exit
Discard Changes and Exit
f
Exit BIOS setup without saving any change.
Save Changes and Reboot
f
Save all changes and reboot the system.
Save Changes
f
Save current changes.
Discard Changes
f
Discard all changes and restore to the previous values.
Restore Defaults
f
Restore or load all default values.
Boot Override
f
The installed bootable devices will appear on this menu, you can select one of them to
be the boot device.
51
BIOS Setup