Related Manuals for Marshall Amplification V-702W-12G
Summary of Contents for Marshall Amplification V-702W-12G
- Page 1 Broadcast A/V Division V-702W-12G Dual 7” 3RU Rack Mount Monitor with 12G Input plus Waveform/ Vector and Analysis Features User Manual...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Product Description ............................3 Menu Settings ................................6 Specifications ................................15 Included Accessories ...........................15 Troubleshooting ..............................15 PC Set Monitor ...............................16 Power Supply Information ........................16 Warranty ..................................16 IMPORTANT SAFETY INSTRUCTIONS • Please read Operating Instructions (this manual) before using the product. •... -
Page 3: Product Description
V-702W-12G Manual PRODUCT FEATURES 1. Rackmount Ears with tilt capability. 2. Headphone Jack Accepts standard 3.5mm stereo mini-phone plug. 3. POWER button (Lights red in standby mode; green when operating). 4. INPUT select button cycles through HDMI and SDI. 5. F1~F4 user-defined shortcut function buttons (lighted when selected). - Page 4 BACK PANEL FEATURES 1. Barrel Power Connector 12V DC power input 5.5mm x 2.1mm push-on connector. Plug the supplied DC power adapter here. (Center pin is +) Important: Please connect only one type of power supply at a time to this monitor.
- Page 5 V-702W-12G Manual 3,4,9,10. HDMI Digital Video Connectors HDMI input and loop out. Embedded audio may be monitored at the Headphone jack and visually monitored on-screen. 5,6,7,8. Serial Digital “BNC” Connectors SDI input and loop out. Compatible with SD-SDI, HD-SDI, 3G-SDI and 12G-SDI inputs.
-
Page 6: Menu Settings
MENU SETTINGS Press MENU knob on the monitor and function menus will pop-up on the screen. Rotate left or right to select an option. Then press the knob again to open the sub-menu. When an arrow pointer ap- pears in the menu, turn the Menu knob again to access the item or to confirm a selection. 1. - Page 7 V-702W-12G Manual 1. PICTURE cont..Brightness – used to establish the correct black level in the pic- ture. Default value is 50. Contrast – establishes the range of dark to light areas in the picture. Default value is 50. Saturation – sets the amount of color information in the picture.
- Page 8 HDR – HDR “High Dynamic Range” is used to properly view video that has been enhanced through one of the common HDR processes. Three SMPTE ST 2084 standard settings are available. These are calibrated to 300, 1000 and 10,000 NIT displays. (The only 10,000 NIT displays are projectors). A fourth setting is available, HLG, which is commonly used for broadcast.
- Page 9 V-702W-12G Manual Aspect Mat – darken the background just behind the markers. Thickness – sets the width of the markers. This page provides controls for picture size, Zoom, check field, image freeze 3. DISPLAY and Overscan. Scan – Adjust the scan mode among [Aspect], [Pixel To Pixel], [Zoom].
- Page 10 The Wave page offers adjustments for the on-screen Waveform monitor, Vector 4. WAVE scope displays, and video assist functions like focus peaking, exposure “zebras”, false color luminance level check. Full Mode – The following analysis functions are full-sized and fill the entire display. In this mode, Video is not displayed Waveform –...
- Page 11 V-702W-12G Manual Peaking Color – Select one of the peaking colors: Red, Green Blue, White, Black. Peaking Level – adjust the amount of peaking color. The range is 1 - 100. False Color – a method to show each brightness in the picture with a different color. It provides a quick way to tell if one part of a picture is too bright or too dark.
- Page 12 With normal audio, there will be a pattern of constantly moving lines. Vector CH – With SDI input, channel pairs may be selected from 1 – 16. With HDMI input, channels 1 & 2 will be used. Audio CH – With SDI input, channel pairs may be selected from 1 – 16. With HDMI input, channels 1 &...
- Page 13 V-702W-12G Manual Language – sets on-screen messages to either English or Chinese. Color Bar – places color bars on screen to check the monitor operation. OSD Time – adjusts the amount of time menus remain on screen. OSD Transparency – adjusts the Transparency of menus for visibility Knob Config –...
- Page 14 9. USER FUNCTION SHORT CUT (F1 – F4) MENU SELECTIONS The monitor front panel has four special function keys marked F1 through F4. These are pre-programmed as short cuts keys per this table: These function keys may be re-programmed at any time by first pressing the function key for about three seconds.
-
Page 15: Specifications
V-702W-12G Manual SPECIFICATIONS INCLUDED ACCESSORIES • DC 12V 3A Universal 120/240 VAC 50/60 Hz Power adapter with 5.5mm x 2.1mm push connector • TALLY kit – plug in module adapts 15-pin connector to solderless terminal block TROUBLESHOOTING 1. Power on but no picture: Check whether the cables are correctly connected. -
Page 16: Pc Set Monitor
This model has the 4-pin XLR connector and is rated 12Volts DC at 5 Amps. WARRANTY Marshall Electronics warranties to the first consumer that this V-702W-12G, dual 7” rackmount- monitor will, under normal use, be free from defects in workmanship and materials, when received in its original container, for a period of one year from the purchase date.