Advertisement
Quick Links
Advertisement
Summary of Contents for Mirabella International Genio I005006
- Page 1 Quick Start Guide I005006 Mirabella Genio Treat Dispenser P a g e...
-
Page 2: Installation
Product Details A. Camera B. Treat Dispensing port C. Indicator Light D. Feed / Wi-Fi Paring Button E. Speaker F. Microphone hole *It is recommended to use pet treats sized between 0.5cm - 1.5cm only Installation It is recommended to place this If you choose to mount it on the product at a height of about 1.2 wall, you can use the wall hook... - Page 3 1. Install the APP and register an account For the best experience, download the "Mirabella Genio" app to your smartphone from App Store or Google Play, the Genio app icon will be displayed after installed successfully Safety & Warnings, please read before using the Treat Dispenser •...
- Page 4 2. Pairing Treat Dispenser using Mirabella Genio App Remove the Treat Dispenser from the box, connect the adaptor to the pet treat dispenser and plug adaptor into your wall socket. Power on the dispenser, wait 30 seconds until you hear the audio notification, “Device is ready to be connected”...
- Page 5 Tap on “Beeped Indictor switched” It will then start to connect your device. (refer to the image below). Once the countdown ends, the Treat Dispenser has now successfully been paired to your APP. You will hear that “ Device connection successful” indicator light remind solid white light.
- Page 6 AP connection method (if QR code scan doesn’t work) if somehow the treat dispenser does not scan the QR code on your phone, please try AP connection method. Reset the device, this time in the Reset the device first screen, switch from EZ mode to AP mode Note: If you fail to see a Wi-Fi name beginning with the word SmartLife_XXXX, Please reset the device again...
- Page 7 After connected to the SmartLife_XXXX, return to the Mirabella Genio app and it will then commence the 0-100% countdown process Please pay attention to the Please check and ensure screen to determine the cause of time-out error 1. You enter the correct 2.4GHz Wi-Fi name and If it unable progress to password.
- Page 8 Treat Dispenser usage Tips (The interface may change subject to software updates) to take snapshot and save it to phone’s camera roll press and talk to your pet record live footage into your phone’s internal storage set a schedule to feed your tap feed button to release food from the food hopper turn on/off the sound on...
- Page 9 Tap on the pencil icon you can access the Treat dispenser Settings page; Share Device: sharing this Treat Dispenser with other Genio end user Device information: detail information for this device, owner information, Virtual ID, IP address etc Basic Function Settings: access to status indicator on/off, Flip screen, Time Watermark option IR Night Vision: on/off or Auto...
- Page 10 Short Record (Dispensed Food sound recording) After pressing the “Short record” button, you can record your own 5 second voice message on the device. This recording will be played back when the treat is dispensed. Any newly recorded message will automatically overwrite the previous one.
- Page 11 FAQ: How to connect Treat Dispenser to another router? Go the treat dispenser settings page, look for “remove device” Remove it and reset the treat dispenser and pair it again through the app. Poor performance, taking long time to load the live footage? Please check the Wi-Fi signal, if it is less than 65%, you will need to consider changing the treat dispenser location or improving your modem/router Treat dispenser went offline and doesn’t reconnect back online by itself?
- Page 12 In the genio app home screen, tap on, Me, -> FAQ & Feedback -> Report issue Fill in the fault information or suggest for the app/product, then submit Mirabella International Pty Ltd 1 Mirabella Drive Tullamarine VIC. 3043 Australia t: 1800 636 528 e: genio@mirabella.com.au...
Need help?
Do you have a question about the Genio I005006 and is the answer not in the manual?
Questions and answers