Download Print this page

CEECO SN200 Setup Manual

Voip adapter

Advertisement

Quick Links

SN200 Setup Guide
Communication Equipment
& Engineering Company
VoIP Adapter
SN2000-Steup-ISSUE5.0
Serving the Telephone Industry Since 1930
519 West South Park Street
Okeechobee, FL 33313
Voice: 863-357-0798
Fax
863-357-0006

Advertisement

loading

Summary of Contents for CEECO SN200

  • Page 1 SN2000-Steup-ISSUE5.0 VoIP Adapter SN200 Setup Guide Serving the Telephone Industry Since 1930 Communication Equipment 519 West South Park Street & Engineering Company Okeechobee, FL 33313 Voice: 863-357-0798 863-357-0006...
  • Page 2 Issue 4.00 IMPORTANT INFORMATION CUSTOMER Please fill in before you continue. The following information is necessary when calling CEECO for assistance. MODEL NUMBER SN200 VoIP Adapter SERIAL NUMBER DATE MANUFACTURED LOCATION INSTALLED For us to better serve you, please have this information available when calling for technical support.
  • Page 3: Table Of Contents

    RECOMMENDED TOOLS AND TEST EQUIPMENT ............. 3 INSTALLATION AND CONFIGURATION INSTRUCTIONS ..........4 INSTALLATION CONT..........................5 PARTS LIST ............................ 6 REPAIR AND RETURN INFORMATION .................. 8 WARRANTY POLICY ........................9 RECOMMENDED TOOLS AND TEST EQUIPMENT CEECO Communication Equipment and Engineering Company PROPRIETARY...
  • Page 4: Installation And Configuration Instructions

    PC with LAN network connection and switch INSTALLATION NOTES If the SN200 is or will be installed in the phone, Run the LAN cable/wire through the center hole of the back plate and attach the proper connector (i.e. RJ45). Also, run the power adapter cord in the same manner. The power adapter requires a 100-240V, 0.3A max, 20-30VA, 50-60Hz source.
  • Page 5: Installation Cont

    Username: admin Password: (leave blank) You will now be on the default page of the SN200 web application. From here you can configure your SN200 device. Use the menu located in the top left corner to navigate to the desired location.
  • Page 6: Parts List

    You will need to wait the 3-5 minute period for the SN200 device to setup again. If a static IP address was not assigned the IP address may change this will also be the case when switching between networks.
  • Page 7 Issue 4.00 OPTIONS: 301-12063 PoE Adapter CEECO Communication Equipment and Engineering Company PROPRIETARY...
  • Page 8: Repair And Return Information

    (863)-357-0798 DIRECT ALL VoIP INQUIRIES AS PER THE ATA DOCUMENTS NON-WARRANTY REPAIR CEECO will repair equipment out of warranty for a set charge plus parts. The customer must pay the shipping costs both directions. RETURN FOR CREDIT Material may be returned for credit only with prior approval. Material authorized for return is subject to a 20% restocking charge based on the manufacturer's list price.
  • Page 9: Warranty Policy

    CEECO will repair or replace any unit during this period if found to be defective for reasons other than abuse and improper use or improper installation.