Scotsman NM650 Service Manual page 3

FOR THE INSTALLER
Water Limitations:
An ice machine is a food manufacturing plant:
it takes a raw material, water, and transforms
it into a food product, ice. The purity of the
water is very important in obtaining pure ice
and in maximizing product life. This section is
not intended as a complete resource for water
related questions, but it does offer these
general recommendations:
1. Check with a water treatment specialist for
a water test, and recommendations regarding
filters and treatment.
2. In most cases, the water used to make ice
should be filtered or treated, depending upon
the water. There is no one type of water filter
that is effective in all situations. That is why a
water test is important.
Note:
Scotsman Ice Systems are designed and
manufactured with the highest regard for
safety and performance. They meet or
exceed the standards of UL, NSF, and CSA.
Scotsman assumes no liability or responsibility
of any kind for products manufactured by
Scotsman that have been altered in any way,
including the use of any part and/or other
components not specifically approved by
Scotsman.
Scotsman reserves the right to make design
changes and/or improvements at any time.
Specifications and design are subject to
change without notice.
Typical Storage Bin - B590
1.25"
January, 1991
Page 3
21.12"
NM650
Drain
3/4"
FPT