Qlightec EPL Series Quick Start Manual

LED Work Lights
EPL Series
25 55
54
Thank you for purchasing Qlight's products. Please read this user manual
carefully prior to installation and operation to ensure safe and correct use.

Precautions for Safety

Failure to follow the instructions below may cause a
loss of life or serious physical injury.
1. During wiring or maintenance, please completely turn off the
power of the product. (Failure to follow this may lead to an electric
shock.)
2. Do not install the product in locations that subjects it to excessive
dust or water other than the conditions designated by the IP
protection ratings indicated for each product. (Failure to follow
these instructions may cause a fire to the product, electric shock,
physical injury, malfunction or damage to the product.)
3. Do not alter or repair this product. If maintenance or repair service
is required, please contact your local Qlight contact point.
(Failure to follow these instructions may lead to fire, electric shock,
or product damage.)
4. Please apply the correct voltage to the product. (Failure to follow
these instructions may lead to fire, electric shock, or product damage.)
5. When the product is applied to a condition that may impact lives
or property, please make sure to have a double safety device.
(Failure to follow this may cause damage to property, fire, electric
shock and loss of life.)

Ordering Specifications

EPL -
[Model number] [Product length]
 |
EPL
Dimensions
Model number
EPL380
EPL550
380 - 24
[Voltage]
| |
380-391mm 24-DC24V
550-556mm
(Units : mm)
EPL
L2
L1
L2
L1
380 391
545 556

Precautions for Correct Use

Failure to follow the proper instructions may cause
damage to property, the product, or malfunction of the
product that would void the warranty.
1. Please remove any objects that can interrupt ventilation
around the product.
2. Please turn off the power of the product immediately if it fails
to operate properly.
3. Carefully wire the product according to each product's
specification.
4. Please be careful in preventing chemicals such as thinner,
benzene, etc. in contact with the surface of the product.
5. Do not apply excessive force/impact to the product.
6. Failure to follow any of the instructions above may cause
malfunction or damage to the product, fire, and electric
shock.

Product Specifications

■ Optics Specifications
Model number
Lens Color
Directions
Light color
Luminous flux DC
Efficacy(lm/W) DC
■ Specifications
Model number
Voltage
Range for operation voltage
Power
DC24V
consumption
Min. 100MΩ(500V DC mega ohm meter)
Insulation resistance
DC:500VAC, 60Hz, 1minute/AC:1,500VAC,
Withstanding voltage
Operating temperature
Protection rating
Materials
Certification
Weight(Approx.)
EPL380 EPL550
Translucent
Cooldaylight
6,000-6,500K
1,000lm 1,500lm
300Lux 500Lux
EPL380 EPL550
DC24V
DC24V
10W 15W
60Hz,1minute
-25°C to +55°C
IP54
Housing-Al, Lens-PC
0.27kg 0.40kg
Please scan the QR code for more
detailed product information.
www.qlight.com