Before First Use - salling 10401932 Instruction Manual

1. Power/Pause button (Short press Start/Pause; Long press Off)
2. Preset programs selection button
3. Temperature increasing button
4. Temperature decreasing button
5. Time-increasing button
6. Time-decreasing button
7. Temperature indicator
8. Timer indicator
9. Fan indicator
10. Working indicator
11-18. Recipe indicators
OPERATION INSTRUCTIONS:
1. Button – Power/Pause
• Once the frying basket is properly placed in the air fryer, the Power/Pause button will illumi-
nate. Short press the Power/Pause button the first time, and the button will flash, and the
default temperature will be 200°C, while the cooking time will be set to 15 minutes.
• Short press the button a second time and the air fryer will start the cooking process.
• Press again can pause the cooking.
• A long press for 3 seconds can stop the appliance during cooking. "OFF" will show on the
screen. The "OFF" light goes out and the fan stops working 20 seconds later and the entire
air fryer will stop operating.
Note: During the cooking process, you can touch the button to control the pause and start of
the cooking process.
2. Button - Preset programs selection
Selecting the Preset Button enables you to scroll through the 8 preset programs. Once
selected, the predetermined time and cooking temperature for the selected preset program
begins.
3. and Button - Temperature increase/decrease button
These 2 symbols enable you to increase or decrease the temperature by 5°C at a time. Holding
the button down will rapidly change the temperature.
The temperature ranges from 80°C to 200°C.
4. and Button - Time increase/decrease button
These 2 symbols enable you to increase or decrease the cooking time by 1 min at a time.
Holding the button down will rapidly change the time. The timer ranges from 1 to 60 mins.
5. Fan indicator and
During cooking, the fan indicator and working indicator will always illuminate.
When you press the pause, the working indicator will turn off.
The appliance will automatically turn off after 1 minute if no input has been given after
pressing pause.

BEFORE FIRST USE

1. Remove all packaging materials.
Working indicator
16