For The Electrician - Scotsman FME2400RL Service Manual

Double System RL

FOR THE ELECTRICIAN

Electrical Connections:
Locate the nameplate for the current
requirements, and then determine the
wire size and type per the National
Electric Code. The machine requires a
solid chassis to earth ground wire.
Refer to the wiring diagram. The ice
machine should be connected to it's
own electrical circuit, and be
individually fused.
Voltage, when the unit is under full
load, must remain within the limitations
listed on page 2.
LOW VOLTAGE CAN CAUSE
EQUIPMENT MALFUNCTION AND/OR
DAMAGE
All external wiring should conform to
the National, State, and local electrical
codes. Usually the services of a
licensed electrician will be required.
CONFORM TO ALL APPLICABLE CODES
JUNCTION BOX
JUNCTION
DETAIL OF
BOX
November 2000
Page 4
POWER SUPPLY